(20') A flexible pavement is to be designed to carry the design ESAL of 6.4x10⁶. The effective resilient modulus Mᵣ of the subgrade of the pavement is 15x10³ lb/in² the subbase layer is an untreated sandy soil with an effective Mᵣ of 17.5x10³ lb/in²?and the base material is an untreated granular material with Mᵣ of 27x10³ lb/in²?. The pavement structure will be exposed to moisture levels approaching saturation 20% of the time and it will take about 1 week to drain the base layer to 50% saturation. Determine appropriate depths for the subbase, base, and asphalt pavement layers. Assuming elastic modulus Eac of the asphalt concrete at 68°F is 450,000lb/in².

Answer:

Email etiquette is important

Explanation:

It is important to understand how to use correct email etiquette because it helps you communicate more clearly. It also makes you seem a bit more professional too. For example depending in who you're emailing like say you're emailing your teacher for help then here's how it'd go:

Dear(teacher name, capitalize, never use first name unless they allow it)

Hello (teacher name), my name is (first and last name) from your (number class) and I was wondering if you could please help me out with (situation, be clear on what you need help with otherwise it won't get through to them)? If you could that would be greatly appreciated!

Sincerely,

(your name first and last)

Answer:

See Explanation

Explanation:

The question has missing details;however, I'm able to pick the following points from the question

Having said that, the question can be solved in two ways.

I'll answer this question using the first method and the solution is as follows (See Comments for line by line explanation):

#This line prompt user for number of countries

n = int(input("Number of countries: "))

#This initializes an empty list for loan amounts

loan_amounts = []

#This initializes an empty list for country

country = []

#The following iteration gets names of countries and their respective loan amounts

for i in range(0,n):

    country_name = input("Name of country: ")

    loan = int(input("Loan Amount: "))

    country.append(country_name)

    loan_amounts.append(loan)

#This gets the maximum loan

max_loan = max(loan_amounts)

#This gets the index of the maximum loan

iindex = loan_amounts.index(max_loan)

#This gets the country with the maximum loan

max_country = country[iindex]

#This gets the minimum loan

min_loan = min(loan_amounts)

#This gets the index of the minimum loan

iindex = loan_amounts.index(min_loan)

#This gets the country with the minimum loan

min_country = country[iindex]

#This prints the country with the maximum loan and the loan amount

print(str(max_country)+": "+str(max_loan))

#This prints the country with the minimum loan and the loan amount

print(str(min_country)+": "+str(min_loan))

Answer:

  Av = -800

Explanation:

The gain to the output of the first op-amp is ...

  A1 = -R2/R1 = -1000/10 = -100

The gain of the voltage divider R3/R4 is ...

  A2 = R4/(R3+R4) = 10/(10+10) = 1/2

The gain of the second op-amp circuit from the positive terminal to the output is ...

  A3 = 1+ R5/R6 = 1 + 150/10 = 16

Then the total circuit gain is ...

  Av = A1×A2×A3 = (-100)(1/2)(16)

  Av = -800

_____

Additional comment

In the above, we have assumed ideal op-amps, with infinite gain and infinite input impedance. The resistor values used in the calculations are all Kohms, so we can avoid writing unnecessary zeros.

It is impossible to guess what the output of the provided bash script will be without first understanding its contents and its goals.

Reviewing the source code of a bash script is required in order to make an accurate prediction regarding the output produced by the script. It is unfortunate that the script itself has not been provided, as a result it is hard to establish how the script will behave or what output it will produce.

Within a Unix or Linux command line environment, bash scripts are utilised for the purpose of automating certain operations. They are able to handle a wide variety of tasks, including the management of systems, processing of data, and manipulation of files, among other things. The output of the script is going to be determined by the particular instructions, functions, and logic that are incorporated into it.

It is not possible to generate an output if you do not have access to the script's source code. If you would be willing to share the details of the bash script with me, I will be able to examine it and give you a more precise response. This would allow me to provide a more complete answer or support.

Learn more about bash script here:

https://brainly.com/question/30880900

#SPJ11

In the radio communication system, multipath is the propagation phenomenon that causes diffusion or reflection in multiple different directions of a signal.

Multipath is a propagation mechanism that impacts the propagation of signals in radio communication. Multipath results in the transmission of data to the receiving antenna by two or more paths. Diffusion and reflection are the causes that create multiple paths for the signal to be delivered.

Diffraction occurs when a signal bends around sharp corners; while reflection occurs when a signal impinges on a smooth object. When a signal is received through more than one path because of the diffraction or reflection, it creates phase shifting and interference of the signal.

You can learn more about signal propagation at

https://brainly.com/question/14452898

#SPJ4

The statement "Employees are not responsible for their own safety while at work" is false because Employees most certainly are responsible.

A multidisciplinary discipline dealing with the safety, health, and welfare of individuals at work is known as occupational safety and health, often known as occupational health and safety, occupational health, or occupational safety.

An environment that is safe and healthy for workers may minimize injury and sickness expenses, lower levels of absenteeism, boost output and quality, and improve employee morale. In other words, safety benefits the business.

Thus, the statement "Employees are not responsible for their own safety while at work" is false because Employees most certainly are responsible.

Learn more about Occupational safety here:

https://brainly.com/question/27577742

#SPJ2

Answer:

123.46 MPa

Explanation:

( Aluminum alloy Plane strain fracture toughness = 29 MPa ( 26.39 ksi )

Fracture results at a stress of 101 MPa ( psi )

maximum internal crack length = 7.5 mm ( 0.2953 in )

Compute the stress level at which fracture will occur for a critical internal crack length of 5 mm ( 0.1969 in )

Y = \(\frac{KI_{c} }{\alpha \sqrt{\pi a} }\)  

Y =  29 / 101 √π [( 7.5 * 10^-3 ) / 2]

   = 29 / 101 √ 0.01178097245 = 29 / ( 101 * 0.1085 )

   = 2.65

hence the stress level at which fracture will occur for a critical internal crack length of 5 mm

∝c = \(\frac{KI_{c} }{y\sqrt{\pi a} }\)

Given;  y = 2.65 , KIc = 29, a = ( 5 * 10^-3 ) / 2 = 0.0025

hence ∝c = 29 / 2.65 \(\sqrt{\pi *0.0025}\)

                 = 29 / 0.2349 ≈ 123.46 MPa

When using a radio, it is important to wait for a short duration before speaking to avoid cutting off the first words of your transmission. This waiting time is commonly known as "transmitting time" or "key-up time."

The recommended duration to wait before speaking is usually around 1 to 2 seconds. This allows the radio system to establish a connection and for any signal delays to settle before transmitting your voice.

By waiting for this brief period, you ensure that your entire message is transmitted clearly without any parts being cut off. It is a good practice to give a moment of silence before starting to speak on the radio to ensure effective communication.

Remember, clear and concise transmissions are crucial for effective communication over a radio system.

To know more about transmission visit :

https://brainly.com/question/32666848

#SPJ11

Answer:

closer the voltage gets to its peak

Explanation:

The closer the voltage gets to its peak, the slower it changes, meaning less current has to flow. When the voltage reaches a peak at point b, the capacitor is fully charged and the current is momentarily zero. Step 2 - After reaching a peak, the voltage starts dropping.

The voltage falls from a certain point where the maximum voltage is reached due to high resistance in the electrical wiring or connectors.

Charged electrons (current) are pushed through a conducting loop by the pressure of the power source in an electrical circuit, allowing them to perform tasks like lighting a lamp.

Less current must flow since the voltage fluctuates more slowly as it approaches its peak. The capacitor is fully charged, and the current is briefly zero when the voltage hits a peak at the point. Another reason for it can be a circuit component that is broken

Therefore, if the voltage drop is more than the parameter's upper limit, there is a fault in the circuit. High resistance in the electrical wires or connectors is the cause of this issue.

To learn more about voltage, refer to the link:

https://brainly.com/question/29445057

#SPJ2

Answer:

d. is applied after the ceiling joists are

installed.

Answer:

Electrical energy

The correct answer is: a. brush

Your question is about identifying the component that provides a connection to a stationary circuit by riding against a rotating component. The correct answer is: a. brush
A brush is an electrical component used in various devices, like motors and generators, to maintain electrical contact with a rotating part. It ensures that the electrical current is transferred efficiently and consistently between the stationary circuit and the rotating component. Brushes are typically made of carbon or graphite, materials that have good electrical conductivity and can withstand friction from the rotating part. This helps in minimizing wear and tear while providing a stable connection.

To know more about stationary visit:

https://brainly.com/question/9971749

#SPJ11

Answer:

The correct answer is that a hydraulic power system is used for large amounts of force.

Explanation:

A pneumatic power system would be much more effective at focusing on a specific area. One person would be able to hold a pneumatic system, as the design can be made small. It can even be designed with a simple on/off switch.

The hydraulic system would fail because hydraulic power system is used for large amounts of force.

Energy or signals are transported through the static or dynamic forces of liquids in hydraulic power transmission systems. These fluid power systems are a subset of them. The two types of fluid power are hydraulics and pneumatics. The valves aid in controlling the liquid's flow and relieving pressure when necessary.

Pumps are used in hydraulic systems to force hydraulic fluid through the system and generate fluid power. The fluid flows to the cylinder, where the hydraulic energy is converted back into mechanical energy, after passing through the valves.

Therefore, Due to the hydraulic system's need for high levels of force, it would malfunction.

Learn more about the hydraulic system, refer to:

https://brainly.com/question/27961071

#SPJ5

Answer:

Q = [ mCp ( ΔT) ] \(_{cooling water }\)

(ΔT)\(_{cooling water}\) and  Q  is given

\(m_{cooling water}\)  = \(\frac{Q}{Cp[ T_{out} - T_{in} ] }\)

next the rate of condensation of the steam

Q = [ m\(h_{fg}\) ]\(_{steam}\)

  \(m_{steam} = \frac{Q}{h_{fg} }\)

Total resistance of the condenser is

R = \(\frac{Q}{change in T_{cooling water } }\)

Explanation:

How will the rate of condensation of the steam and the mass flow rate of the cooling water can be determined

Q = [ mCp ( ΔT) ] \(_{cooling water }\)

(ΔT)\(_{cooling water}\) and  Q  is given

\(m_{cooling water}\)  = \(\frac{Q}{Cp[ T_{out} - T_{in} ] }\)

next the rate of condensation of the steam

Q = [ m\(h_{fg}\) ]\(_{steam}\)

  \(m_{steam} = \frac{Q}{h_{fg} }\)

Total resistance of the condenser is

R = \(\frac{Q}{change in T_{cooling water } }\)

Answer:

23.34 seconds

Explanation:

Flow rate = 1500

Arrival = 800 vehicle per hour

Cycle c = 60 seconds

Dissipation time = 10 seconds

Arrival time = 800/3600 = 0.2222

Rate of departure = 1500/3600 = 0.4167

Traffic density p = 0.2222/0.4167 = 0.5332

Real time = r

r + to + 10 = c

to = c-r-10 ----1

t0 = p*r/1-p ----2

Equate both 1 and 2

C-r-10 = p*r/1-p

60-r-10 = 0.5332r/1-0.5332

50-r = 0.5332r/0.4668

50-r = 1.1422r

50 = 1.1422r + r

50 = 2.1422r

r = 50/2.1422

r = 23.34 seconds

Answer:

Explanation:

The probability of n bits being in error is 10Cn × p^n, where ...

  10Cn = 10!/(n!(10-n!))

  10C1 = 10

  10C2 = 45

  10C3 = 120

This is the product of the probability that n bits can be in error and the number of ways that n bits can be chosen from the 10 in the word.

  n = 1: 10p

  n = 2: 45p²

  n = 3: 120p³

Answer:

Explain any five applications of computer modeling in beams.

Explanation:

Answer:

b. A view of a building seen from one side, a flat representation of one façade. This is the most common view used to describe the external appearance of a building.

Explanation:

An elevation is a three-dimensional, orthographic, architectural projection that reveals just a side of the building. It is represented with diagrams and shadows are used to create the effect of a three-dimensional image.

It reveals the position of the building from ground-depth and only the outer parts of the structure are illustrated. Elevations, building plans, and section drawings are always drawn together by the architects.

In the context of information privacy, spam refers to unsolicited commercial e-mail that is sent in bulk to a large number of recipients. Therefore, option (c) is the correct answer.

Spam is typically sent using automated mailing software, which allows spammers to send large volumes of e-mails quickly and easily. The content of spam e-mails can vary widely, but it is typically advertising or promotional in nature, and often includes links to websites or products that the sender is trying to promote.

Spam is generally considered to be a nuisance and a potential privacy threat because it can be used to spread malware, phishing scams, and other types of malicious content. Additionally, the indiscriminate nature of spam means that it can easily clog up e-mail inboxes and make it difficult for users to find and respond to legitimate messages.

Overall, it is important for individuals and organizations to take steps to protect their privacy and security online, including implementing spam filters and other tools designed to block unwanted e-mails.

In the context of information privacy, spam refers to unsolicited commercial e-mail that is sent in bulk to a large number of recipients. Therefore, option (c) is the correct answer.

Spam is typically sent using automated mailing software, which allows spammers to send large volumes of e-mails quickly and easily. The content of spam e-mails can vary widely, but it is typically advertising or promotional in nature, and often includes links to websites or products that the sender is trying to promote.

Spam is generally considered to be a nuisance and a potential privacy threat because it can be used to spread malware, phishing scams, and other types of malicious content. Additionally, the indiscriminate nature of spam means that it can easily clog up e-mail inboxes and make it difficult for users to find and respond to legitimate messages.

Overall, it is important for individuals and organizations to take steps to protect their privacy and security online, including implementing spam filters and other tools designed to block unwanted e-mails.

Learn more about privacy here:

https://brainly.com/question/31524356

#SPJ11

Answer:

Read Below

Explanation:

Apparent power (volt-amperes) is the trigonometric sum of Real power (watts) and reactive power (volt-amperes reactive - VARs). Stated mathematically: VA squared = watts squared plus VARs squared

similarly, power factor, the ratio of real power to apparent power, is the cosine of the angle between the real power leg and apparent power hypotenuse of a right triangle (Reactive power being the other leg).

Just use these relationships and a bit of high school trigonometry and you can calculate the apparent power and power factor for the system you are describing.

Hopes this Helps :D

Mark me Brainiest Please : )

The power factor of the 65-kVA load, if the overall power factor is 0.85 lagging is 0.585 lagging​.

Apparent energy (volt-amperes) is the trigonometric sum of Real energy (watts) and reactive energy (volt-amperes reactive - VARs). Stated mathematically: VA squared = watts squared plus VARS squared similarly, energy component, the ratio of actual energy to obvious energy, is the cosine of the perspective among the actual energy leg and obvious energy hypotenuse of a proper triangle (Reactive energy being the opposite leg).

Just use those relationships and a chunk of excessive college trigonometry and you may calculate the obvious energy and energy component for the machine you're describing.

Read moe about the load :

https://brainly.com/question/2264373

#SPJ2

The correct answer is when retentive power is restored the accumulated count will be 300.

PLC counters are normally retentive; that is, whatever count was contained in the counter at the time of a proces- sor shutdown will be restored to the counter on power-up. The counter may be reset, however, if the reset condition is activated at the time of power restoration.A counter instruction is an input instruction. A counter's input signal can come from an external device such as a sensor. Up and down counters may be programmed together to count up and down. Counters can count past their preset values.

To learn more about retentive click the link below:

brainly.com/question/28851511

#SPJ4

Perpendicular parking is similar to making a right turn in that both involve the process of turning the vehicle 90 degrees to the right.

Perpendicular parking is also referred to as 90-degree parking. To park a vehicle perpendicular, the driver approaches the parking area from the side and then turns the steering wheel to the right until the vehicle is at a 90-degree angle to the road. This method requires the driver to keep a safe distance from other parked vehicles. Like making a right turn, perpendicular parking is a basic driving skill that every driver should learn before taking to the road.

This type of parking is often used in parking garages, mall parking lots, and other parking lots with limited space. As such, mastering the technique of perpendicular parking is essential for any driver who wants to become a competent and safe driver.

Learn more about Perpendicular parking

https://brainly.com/question/30591515

#SPJ11

Answer:

Explanation:

In satellite communications, downlink is the establishment of a communications link from an orbiting satellite down to one or more ground stations on Earth. Contrast with uplink.

The tool that has a revolving vertical shaft and a cutter is a router. The correct option is b.

There are many different kinds of power tools, including portable power tools like a circular saw, heat guns, and wall chasers as well as electrical power tools like impact wrenches, lathes, power drills, power ratchet sets, and power saws.

Power tools including circular saws, jigsaws, drills, hammer drills, sanders, grinders, routers, and many others reduce labor and time requirements. The requirement for knowledge of the risks that power tools provide if used improperly is raised due to their rising use.

A power tool called a router has a flat base and a spinning blade that protrudes beyond the base. An electric motor or a pneumatic motor can drive the spindle.

Therefore, the correct option is b) router.

To learn more about power tools, refer to the link:

https://brainly.com/question/30115428

#SPJ6

Answer:

The first five terms of the given geometric sequence are

8,40,200,1000,5000

Explanation:

:)

Answer:

Resistance of copper = 1.54 * 10^18 Ohms

Explanation:

Given the following data;

Length of copper, L = 3 kilometers to meters = 3 * 1000 = 3000 m

Resistivity, P = 1.7 * 10^8 Ωm

Diameter = 0.65 millimeters to meters = 0.65/1000 = 0.00065 m

\( Radius, r = \frac {diameter}{2} \)

\( Radius = \frac {0.00065}{2} \)

Radius = 0.000325 m

To find the resistance;

Mathematically, resistance is given by the formula;

\( Resistance = P \frac {L}{A} \)

Where;

First of all, we would find the cross-sectional area of copper.

Area of circle = πr²

Substituting into the equation, we have;

Area  = 3.142 * (0.000325)²

Area = 3.142 * 1.05625 × 10^-7

Area = 3.32 × 10^-7 m²

Now, to find the resistance of copper;

\( Resistance = 1.7 * 10^{8} \frac {3000}{3.32 * 10^{-7}} \)

\( Resistance = 1.7 * 10^{8} * 903614.46 \)

Resistance = 1.54 * 10^18 Ohms

Answer:

D. The damage it causes is irreversible

Explanation:

Silicosis is a long term lung disease caused by crystalline silica dust inhalation. There is no cure, and once the damage is done it cannot be reversed.

------------------

Like stated above, the damage is irreversible. Option A is incorrect.

Construction workers are constantly moving to build whatever they're working on. The disease will make it hard to breathe and will have a heavy effect on their lungs, preventing them from properly doing their jobs. Additionally, it's possible to get the disease from this job since you're constantly inhaling dust particles.

Silicosis does major damage to the lungs. The dust particles are attacked by the immune system which causes inflammation and eventually leads to areas of hardened and scarred lung tissue.

Thus, the best option is D.

hope this helps :)

Answer: true

Explanation:

ᴄᴏᴍᴘʟᴇᴛᴇɴᴇꜱꜱ ᴍᴇᴀɴꜱ ᴛʜᴇ ꜱᴛᴀᴛᴇ ᴏꜰ ʙᴇɪɴɢ ᴄᴏᴍᴘʟᴇᴛᴇ ᴀɴᴅ ᴇɴᴛɪʀᴇ; ʜᴀᴠɪɴɢ ᴇᴠᴇʀʏᴛʜɪɴɢ ᴛʜᴀᴛ ɪꜱ ɴᴇᴇᴅᴇᴅ.

ʙᴇᴀᴜᴛʏ ᴍᴇᴀɴꜱ combination of qualities, such as shape, colour, or form, that pleases the aesthetic senses, especially the sight.