20 g of carbon dioxide is placed in a 0.75 l bottle and sealed. what is the pressure in the bottle if the temperature is 25 c?

Answer:

(b) is correct

object moving towards you - higher frequency heard

object moving away from you - lower frequency heard

Each photon's momentum in the light beam is p=h=632. 8106. The first gas laser was the helium-neon laser.

Although the first laser transitions were in the near infrared, the red laser, with a wavelength of 632.8 nm, is now the most widely employed transition. This laser is offered in lengths ranging from around 10 cm to more than 100. For longer wavelength lines, helium-neon lasers with a 1- to 10-m W output at 543 nm (green), 595 nm (yellow), or 633 nm provide an option to krypton ion lasers (red). A helium-neon laser can produce light with a power output of 1 mW at a wavelength of 632.8 nm.

Learn more about wavelength here-

https://brainly.com/question/13533093

#SPJ4

The measurement of body temperature is an example of a variable that uses option A, interval scale.

A scale with an interval has order and a meaningful difference between two values. Temperature (Fahrenheit), temperature (Celsius), pH, SAT score (200-800), and credit score are a few examples of interval variables (300-850).

One variable that uses interval scale is the measurement of body temperature.

Only ratio scales have a genuine zero, even though interval and ratio data can both be categorized, sorted, and spaced equally apart between consecutive values. As 0 is not the lowest attainable temperature, temperature in Celsius or Fahrenheit, for instance, is measured on an interval scale.

To know more about interval scale, visit,

https://brainly.com/question/29518046

#SPJ4

The cloud must spin more quickly in order to maintain angular momentum (if the distance of the mass from the center of the cloud decreases, the rate of spin must increase to compensate).

Stars and planets are created by the collision of enormous cosmic gas and dust clouds. The contents of these clouds as well as the clouds themselves are continually in motion as they revolve in the main gravitational field of the galaxy.

This movement will most likely cause the cloud to rotate somewhat when viewed from a place near its center. This rotation can be described in terms of angular momentum, an immutable measure of its motion.

The conservation of angular momentum explains why ice skaters spin faster when they draw their arms in. As her arms go closer to her axis of rotation, she moves more quickly while keeping the same angular momentum.

To know more about angular momentum, visit:

https://brainly.com/question/17370675

#SPJ4

Answer:

29.55 kg

Explanation:

force gravity =  G m1 m2 / (r^2)    now change the mass 1 and the r

                     =   G 2m1 m2 / ( 2r)^2

                      = 2/4  G m1 m2 / (r^2)

the weight will be 2/4   or  1/2 the original

The region of a longitudinal wave that is represented by an arrow is known as rarefaction. Thus, the correct option for this question is A.

A longitudinal wave may be defined as a type of wave where the displacement of the medium is in the same direction as the direction of the traveling wave. The distance between the centers of two consecutive regions of compression or the rarefaction is defined by wavelength, λ.

Longitudinal waves express areas of compression and rarefaction: compressions are regions of high pressure due to particles being close together. Rarefactions are regions of low pressure due to particles being spread further apart.

Therefore, the region of a longitudinal wave that is represented by an arrow is known as rarefaction. Thus, the correct option for this question is A.

To learn more about Longitudinal waves, refer to the link:

https://brainly.com/question/14364881

#SPJ2

Answer:

Approximately \(1.3\times 10^{8}\; \rm m\cdot s^{-1}\).

Explanation:

Look up the speed of light in vacuum: \(c \approx 3.00\times 10^{8}\; \rm m\cdot s^{-1}\). Denote the speed as \(c\).

If the speed of light in a medium is \(v\), the refractive index of that medium would be:

\(\displaystyle n = \frac{c}{v}\).

Note, that the refractive index of a medium is inversely proportional to the speed of light in this medium. A medium with a larger refractive index would thus correspond to a slower speed of light.

Rearrange this equation to find the speed of light \(v\) in this medium:

\(\begin{aligned}v &= \frac{c}{n} \\ &= \frac{3.00\times 10^{8}\; \rm m\cdot s^{-1}}{2.4} \\ &\approx 1.25 \times 10^{8}\; \rm m\cdot s^{-1}\end{aligned}\).

Units 1 ("rad/s"), 2 ("rev/s^2"), and 4 ("degrees/s^2") are appropriate for describing rotational acceleration. However, unit 3 ("rev/m^2") is not suitable as it combines angular displacement with area and does not represent rotational acceleration.

Out of the four listed units, the third unit, "rev/m^2," would not be appropriate for describing rotational acceleration.

1) "rad/s" (radians per second) is an appropriate unit of rotational acceleration. Radians are a standard unit for measuring angles, and when divided by time, it represents the rate of change of angular velocity or rotational acceleration.

2) "rev/s^2" (revolutions per second squared) is also an appropriate unit of rotational acceleration. It represents the rate of change of angular velocity in terms of revolutions per second squared.

4) "degrees/s^2" (degrees per second squared) is another valid unit of rotational acceleration. Although radians are generally preferred over degrees in scientific calculations, degrees can still be used to express rotational acceleration.

However, the third unit, "rev/m^2" (revolutions per square meter), is not appropriate for describing rotational acceleration. It does not represent a rate of change of angular velocity or rotational acceleration. Instead, it combines a unit of angular displacement (revolutions) with a unit of area (square meter), which is unrelated to rotational acceleration.

In summary, the first three units ("rad/s," "rev/s^2," and "degrees/s^2") are appropriate for describing rotational acceleration, while the fourth unit ("rev/m^2") is not.

learn more about "acceleration":- https://brainly.com/question/460763

#SPJ11

The system described by the transfer function G(s) = -co² s² + 2a + w², with a damping ratio of 1.3 and a natural frequency of 0.5, has an overdamped unit step response. So, the correct option is (E)

The transfer function of the system is given as G(s) = -co² s² + 2a + w², where co represents the damping ratio, a represents an arbitrary constant, and w represents the natural frequency of the system. We are given that the natural frequency is 0.5 and the damping ratio is 1.3.

To determine the type of unit step response, we need to analyze the damping ratio (co) in relation to the critical damping value (co_critical).

The critical damping ratio (co_critical) is defined as the value where the system is on the threshold between being overdamped and underdamped. It is given by the formula co_critical = 2 * sqrt(a * w²).

In our case, the natural frequency (w) is 0.5, so we can calculate co_critical as follows: co_critical = 2 * sqrt(a * 0.5²).

Since the damping ratio (co) is given as 1.3, we can compare it with co_critical to determine the type of unit step response.

If co > co_critical, the system is considered overdamped (Option E).

If co = co_critical, the system is considered critically damped (Option D).

If co < co_critical, the system is considered underdamped (Option C).

Based on the given values, we can determine that the system is overdamped (Option E) because the damping ratio (1.3) is greater than the critical damping ratio.

To know more about damping ratios, refer here:

https://brainly.com/question/31463018#

#SPJ11

Degeneracy pressure is a quantum mechanical effect that arises due to the exclusion principle that forbids two fermions (particles with half-integer spin, such as electrons and neutrons) from occupying the same quantum state simultaneously. This leads to the formation of a degenerate gas of fermions, which resists further compression and generates an outward pressure that can counterbalance gravity.

In the case of the three objects mentioned, degeneracy pressure plays the most important role in a neutron star (option a). Neutron stars are the remnants of massive stars that have exhausted their nuclear fuel and collapsed under their own gravity. The intense gravitational forces and high densities in the core of a neutron star crush the atomic nuclei together, resulting in a state of matter that is dominated by neutrons. Due to the exclusion principle, these neutrons are forced to occupy higher and higher energy levels until they form a degenerate gas that supports the star against further collapse. This degeneracy pressure is so strong that it can prevent neutron stars from collapsing into black holes, despite their extreme mass.

In contrast, the Sun and a star 10 times as massive as the Sun (options b and c) are not massive enough to generate the extreme densities required for degeneracy pressure to play a significant role. Instead, the pressure that supports these stars comes from the thermal energy of the gas in their interiors, which generates radiation pressure and gas pressure.

learn more about Degeneracy pressure here: brainly.com/question/14439838

#SPJ11

Answer:

Scientific theories attempt to explain how events occur in the natural world.

Answer:

The answer is option  A. Scientific theories attempt to explain an entire group of related phenomena.

Explanation:

I got it right on the test

Hope it helps!

Answer: 98cm

Explanation:

Dimension of rectangle = 30cm by 25cm

Length(l) = 30cm

Width(w) = 25cm

Perimeter of a rectangle = 2(l + w)

Quadrant of circle cut away of each side of the rectangle :

Radius = 7 cm =

That is, the dimension of the triangle reduces by 2 * 7 = 14cm

New length = 30 - 14 = 16cm

New width = 25 - 14 = 11cm

The four corners =( 4 × 2πr ) / 4

2πr = 2 × 22/7 × 7 = 44cm

Perimeter = 2(16cm + 11cm)

= 2(27cm)

Perimeter = 54cm + 44 = 98cm

Since both rats get the tranquilizer and there is no control condition, the experiment is not accurate.

An experiment would be carried out by a scientist in search of data and knowledge. We are aware that in an experiment, the impact of the independent variable on the dependent variable must be determined.

In this instance, the dosage of the medication is the independent variable, and the duration of sleep time for the pet rats is the dependent variable.

Let's notice that a controlled setting is required for every experiment.

We can observe that this experiment lacks a controlled environment, proving that it is not reliable.

A control setting should be introduced, and this experiment would need to be evaluated.

To learn more about the experiment.

https://brainly.com/question/11256472

#SPJ1

Newton's first law, also known as the law of inertia, states that an object will remain at rest or in uniform motion in a straight line unless acted upon by an external force.

It implies that any object, either stationary or in motion, would remain as it is, unless an external force acts on it. When an external force is applied, it results in a change in motion in terms of direction, speed, or both. This is a statement that describes Newton's first law of motion.Basically, Newton's First Law of Motion states that a body at rest remains at rest and a body in motion maintains uniform motion in a straight line, unless acted upon by an external force.

For more question Newton's

https://brainly.com/question/25998091

#SPJ8

Answer:

It orbits our sun is the correct answer

Sagittarius A* is 26,000 light-years away from earth. Hence, option (C) is correct.

Sagittarius A* (Sgr A*), a supermassive black hole at the center of the Milky Way Galaxy with a mass equal to four million Suns, is seen in the constellation of Sagittarius. It is a powerful radio source that is a part of the larger Sagittarius A complex.

One of Chandra's largest observing missions to date led to these new discoveries. In order to obtain the first-ever X-ray photos and energy fingerprints of the multi-million degree plasma swirling around Sgr A*, a black hole with around 4 million times the mass of the Sun, Chandra made observations over the course of nearly five weeks in 2012.

Sgr A* is one of the very few black holes in the cosmos where we can really observe the flow of stuff close by, and it is only 26,000 light years away from Earth.

Learn more about Sagittarius here:

https://brainly.com/question/13233977

#SPJ2

Answer:

Instrumentos Para Medir La Temperatura

Termómetro de máxima y mínima:

Termómetro metálico:

Pirómetro:

Termohidrógrafo:

Answer:

Sometimes you can see light from the Sun passing through clouds and the sunbeams appear as straight lines. After light has been reflected off an object, such as a tree or a book, it still travels in straight lines, but in a new direction.

Explanation:

S=d/t

S=2/16

S=0.125m/s

Answer:corrosion (i believe)

Explanation:

Answer

Mix baking soda and salt with hot water and cover everything with it. The proportions are not crucial, but about 1 tablespoon of salt and 1 tablespoon of baking soda to 3 dl water should do the trick. Lightly tarnished objects should clean up in a few minutes, and you just rinse them of and dry them.

Explanation:

The neutral conductors of different systems should be identified to distinguish the systems by using different colors, by using a tag, or by using other effective means.

The neutral conductors of different systems should be identified to distinguish the systems by using different colors, by using a tag, or by using other effective means. This is to ensure the correct neutral conductor is connected to the correct system and to prevent any confusion when wiring. For example, if a neutral conductor from a 120V system and another from a 240V system are installed in the same raceway, cable or enclosure, they should be identified as such to prevent any wiring mistakes.

To learn more about conductors

https://brainly.com/question/24154868

#SPJ1

False. Multiple energy transformation are not needed to do work. In the context of work, energy transformations occur to convert one form of energy into another, but typically a single transformation is sufficient to perform the desired work.

The principle of conservation of energy states that energy cannot be created or destroyed, but it can be converted from one form to another. Therefore, energy transformations are a means of transferring energy between different forms, rather than requiring multiple transformations to accomplish work. For example, when lifting an object, the chemical potential energy stored in our muscles is transformed into mechanical energy as we apply a force to raise the object against the force of gravity. This single transformation from chemical potential energy to mechanical energy allows us to do work by lifting the object. Similarly, in electrical circuits, electrical energy from a power source is transformed into other forms such as light, heat, or mechanical motion, enabling various devices to perform work.

To learn more about transformation, Click here:

https://brainly.com/question/30462000

#SPJ11

Work output is 2600 J, Thermal efficiency is 28.26%.

To determine the mechanical work output and thermal efficiency of the engine, we need to use the first law of thermodynamics, which states that energy input equals the sum of energy output and work done.

Given:

Heat input (Qin) = 9200 J

Heat output (Qout) = 6600 J

Mechanical work output (W) can be calculated using the equation:

W = Qin - Qout

Substituting the given values:

W = 9200 J - 6600 J

W = 2600 J

The mechanical work output of the engine during one cycle is 2600 J.

Thermal efficiency (η) can be calculated using the equation:

η = (W / Qin) * 100

Substituting the values:

η = (2600 J / 9200 J) * 100

η ≈ 28.26%

Therefore, the thermal efficiency of the engine is approximately 28.26%.

Learn more about mechanical work

brainly.com/question/28012677

#SPJ11

fyjvdng iuhp;iruohpgiryhgutnbrpybgiunpieohgiuojfhdnbj

sodium channel  is responsible for the rapid depolarization phase of potentials that originate in the sa nodal cells.

The resting membrane potential of the SA nodal cells is unstable and spontaneously depolarizes due to a pacemaker potential. The "strange" Na+ current and a drop in the conductance of the inward rectifier K+ channel are to blame for this.

The rapid transmission of depolarizing impulses throughout cells and cell networks by sodium channels, which enable the coordination of higher activities from locomotion to cognition, plays a key role in physiology. These channels hold a particular place in physiology history as well.

To know more about  sodium channel visit : https://brainly.com/question/14982631

#SPJ4

Answer: c. A tide of minimum range that takes place two times a month best describes a neap tide.

A neap tide occurs when the gravitational pull of the sun and the moon are at right angles to each other, resulting in the smallest difference between high and low tides. This occurs twice a month, during the first and third quarters of the lunar cycle. During neap tides, the high tides are lower and the low tides are higher than average.

Explanation:

Because using maximum current, it  resonant current, and the supply voltage is 100 V (Vs = RI = 1000 x 0.1). Equating the reactances of the inductive and capacitive components the resonant frequency, f° =159.155

Electron current is the name for the movement of electrons. Negative to positive electron flow occurs at the terminal. Conventional current, or just current, behaves as though positive charge carriers are what produce current flow. From the positive terminal towards the negative, conventional current flows.

Ohm's law, or V=IR, is the most fundamental electrical law. The V indicates the potential difference between two chargesdifference of two charges is indicated by the V, which stands for voltage. Alternatively, it measuressaid, it is a measurement of the effort necessary to transfer a unit charge between two places.

To know more about current visit:

https://brainly.com/question/14287268

#SPJ4

Sure! Here are the steps for calculating the velocity and distance traveled by the car after 50 seconds :

Step 1: Calculate the velocity using the equation:

\(v = u + at\)

where:

- \(v\) is the final velocity

- \(u\) is the initial velocity (0 m/s, as the car starts from rest)

- \(a\) is the acceleration (3 m/s²)

- \(t\) is the time (50 seconds)

Substituting the values into the equation:

\(v = 0 + (3 \, \text{m/s²}) \times (50 \, \text{s})\)

Step 2: Calculate the distance traveled using the equation:

\(s = ut + \frac{1}{2}at^2\)

where:

- \(s\) is the distance traveled

- \(u\) is the initial velocity (0 m/s)

- \(a\) is the acceleration (3 m/s²)

- \(t\) is the time (50 seconds)

Substituting the values into the equation:

\(s = 0 \times (50 \, \text{s}) + \frac{1}{2} \times (3 \, \text{m/s²}) \times (50 \, \text{s})^2\)

Now, let's simplify these equations:

\(v = 3 \times 50\)

\(s = \frac{1}{2} \times 3 \times 50^2\)

Calculating the results:

\(v = 150\) m/s

\(s = 3750\) meters

Therefore, after 50 seconds, the car will have a velocity of 150 m/s and would have traveled a distance of 3750 meters.

Answer:

There would be tremendous earthquakes and tsunamis, followed by massive volcanism around the impact zone. The ozone layer would be destroyed. The oceans would turn acidic. The Sun would be blotted out, probably for decades.              

Explanation:

    Hope this helps!

Answer: Well it depends on the size. If the asteroid was the size of a basketball, it would most probably turn to dust by the time it reaches the surface. But, if it was the size of Australia, then most probably everyone would die.

Explanation:

Answer:

0.003292

Explanation:

The shape of a defined region in a random dot kinematogram is detected by manipulating the coherence of the dots within that region, which makes the motion of the dots more perceptually salient and allows the shape to be more easily detected.

In a random dot kinematogram, the shape of a defined region is detected by its motion. This is because a random dot kinematogram is a visual display consisting of randomly moving dots that can be manipulated to create a variety of stimuli. These stimuli can be used to study various aspects of visual perception, including motion perception, object recognition, and spatial attention.

To detect the shape of a defined region in a random dot kinematogram, researchers typically use a technique called "coherence manipulation". This involves manipulating the percentage of dots that move in a defined direction within a specific region of the display. By increasing the coherence of the dots within the defined region, the motion of the dots becomes more perceptually salient, allowing the shape of the region to be more easily detected.

To know more about motion visit:-

https://brainly.com/question/2748259

#SPJ11