A 30 in wide single edge notched plate is subjected to a far field uniform stress of 25 Ksi. Determine the critical crack length if the plate material has Kic= 100 ksi(in)^(1/2), and yield strength stress of 40 ksi.
Answers
In this question, we need to determine the critical crack length of a 30-inch wide single edge notched plate subjected to a far field uniform stress of 25 Ksi, knowing that the plate material has Kic = 100 ksi(in)^(1/2) and yield strength stress of 40 ksi.
Here is the solution:Given data:Width of plate (W) = 30 in Uniform stress \((σ) = 25 ksiKic = 100 ksi(in)^(1/2\))Yield strength (σ_y) = 40 ksi Calculation:We know that the stress intensity factor (K) can be calculated by the following formula:K = σ * √(π*a)where σ = applied stress and "a" is the crack length.For a given material, the critical stress intensity factor (Kic) is defined as the value of K at which the crack grows at a critical rate and the material fails. We can determine the critical crack length (a_c) by using the following formula:a_c = (Kic/σ)^2/π
Now we can substitute the given values in the above formulas and calculate the critical crack length as follows:\(K = σ * √(π*a) => a = (K/σ)^2/πK = Kic\) (at critical condition)σ = yield strength stress (σ_y) = 40\(ksia_c = (Kic/σ)^2/π => a_c = (100/40)^2/π => a_c = 1.25\)in Therefore, the critical crack length is 1.25 inches (or in).
To know more about intensity visit:
https://brainly.com/question/17583145
#SPJ11
Related Questions
Explain Why programs when are developed using evolutionary development are likely to be difficult to maintain
Answers
Answer:
When a system is produced using the evolutionary development model, features tend to be added without regard to an overriding design. With each modification, the software becomes increasingly disorganized. System maintenance hampered by these problems, as it is harder identifying the source of bugs in poorly designed systems. Also, keeping the documentation up to date over successive "evolution" is uncommon. Poor documentation also makes maintenance more difficult.
Explanation:
・It leads to implementing and then repairing way of building systems.
・Practically, this methodology may increase the complexity of the system as scope of the system may expand beyond original plans.
・Incomplete application may cause application not to be used as the full system was designed.
・Their results have incomplete or inadequate problem analysis.
list five pieces of personal safety equipment which must be in everyday use in the workshop
Answers
Answer:
safety glasses, hearing protection, respirator, work gloves, and work boots.
Explanation:
please give brainliest!! <3
2.5 a young engineer is asked to design a thermal protection barrier for a sensitive electronic device that might be exposed to irradiation from a high-powered infrared laser. having learned as a student that a low thermal conductivity material provides good insulating characteristics, the engineer specifies use of a nanostructured aerogel, characterized by a thermal conductivity of ka
Answers
The engineer chooses nanostructured aerogel with a low thermal conductivity to create an effective thermal protection barrier that can insulate the sensitive electronic device from the irradiation of the high-powered infrared laser.
The young engineer has been tasked with designing a thermal protection barrier for a sensitive electronic device that may be exposed to irradiation from a high-powered infrared laser.
The engineer has learned that materials with low thermal conductivity provide good insulation.
In this case, the engineer specifies the use of a nanostructured aerogel with a thermal conductivity of "ka".
Nanostructured aerogel is an excellent choice for thermal insulation due to its low thermal conductivity.
This means that it can effectively reduce the transfer of heat from the laser irradiation to the sensitive electronic device. The "ka" value represents the specific thermal conductivity of the aerogel, which indicates how well it can resist the flow of heat.
The lower the "ka" value, the better the insulation properties of the aerogel.
By using nanostructured aerogel as the thermal protection barrier, the engineer ensures that the sensitive electronic device is shielded from the potentially damaging effects of the laser's irradiation.
This helps to maintain the device's performance and integrity, preventing any potential overheating or malfunction.
In summary, the engineer chooses nanostructured aerogel with a low thermal conductivity to create an effective thermal protection barrier that can insulate the sensitive electronic device from the irradiation of the high-powered infrared laser.
To know more about irradiation visit :
https://brainly.com/question/15686891
#SPJ11
Using the formula XC=1/(2πfC) in your answer, how would a capacitor influence a simple DC series circuit?
Answers
The capacitive reactance of a DC series circuit increases when its capacitance decreases and vice-versa.
What is a DC series circuit?A DC series circuit can be defined as a type of circuit in which all of its resistive components are connected end to end, so as to form a single path for the flow of current.
This ultimately implies that, the same amount of current flows through a direct current (DC) series circuit.
The capacitive reactance of a DC series circuit.Mathematically, the capacitive reactance of a DC series circuit is given by this formula:
\(X_C = \frac{1}{2\pi fC}\)
Where:
is the capacitive reactance.f is the frequency.C is the capacitance.From the above formula, we can deduce that the capacitive reactance of a DC series circuit is inversely proportional to both frequency and capacitance. Thus, the capacitive reactance of a DC series circuit increases when its capacitance decreases and vice-versa.
In conclusion, a capacitor would influence a simple DC series circuit by blocking the flow of direct current (DC) through it.
Read more on capacitance here: https://brainly.com/question/22989451
deduce the relationship between e.m.u and e.s.u in technology .
Answers
In the CGS system, the unit of charge is the charging unit (ESU). Also known as "Statistical Pendant" (StatC). In the CGS system, the load unit is the electromagnetic unit (E.M.E.).
The e.s.u. of charge, also known as franklin or statcoulomb, is the charge such that two similar q=1statC charges at a space of 1cm from each other exert an electrostatic force of 1dyn on each other.
The e.m.u. of current, also called the biot or abampere, is the current such that two infinitely-long straight, parallel conductors carrying 1abA of current and separated by 1cm exert a magnetostatic force of 2dyn on each other.
The relations between these units are such that
\(\frac{1 statC}{1 abA * 1s} = \frac{1 statC}{1abC} = \frac{1}{C} = \frac{1 statA}{1abA} = \frac{\frac{1 statC}{s} } {1 abA}\)
where c is the speed of light.
The ESU and EMU systems of electromagnetic units are different and they should generally be considered separate and independent (if relatively similar), and they do not coincide with the gaussian set of electromagnetic units.
For example, since the electrical displacement vector D is defined as \(E + 4\pi P\) in the ESU system and \(\frac{1}{c^{2} } E + 4\pi P\) the EMU system, it is not possible to exchange the formulas of one system for another without using a formula dictionary like the one at Jackson's end. There is not. classical electrodynamics.
Learn more about Electromagnetics at
https://brainly.com/question/2634931?referrer=searchResults
using the de-goodman criteria and a design factor of 1.5, calculate the diameter based on the shafts loadings and your guess for the shaft diameter at the critical location. what is the shaft diameter? assume the notch radius to be 0.02 in. (you must provide an answer before moving to the next part.)
Answers
Using the de-goodman criteria and a design factor of 1.5, the shaft diameter will be 0.187 inch.
Calculate the shaft diameterTo find the shaft diameter, let's use the equation below:
`σa/σw = [1/(Ka)] [(E/2E')^(1/m)] `
We know that the load on the shaft is 50,000 lbf.
Using this, we can calculate the alternating stress on the shaft:
`σa = load / (π * (d^2)/4) `
where d is the shaft diameter, we need to find.
Alternating stress `σa = 50,000/(πd^2/4) = 64,041/d^2`
Factor `n = 1/1.5 = 0.67`
For the material of the shaft, Ka and m values can be obtained using Soderberg criterion:
`σw = (σm/Na)(σf/Nf) `where σm is the mean stress, Na and Nf are empirical factors, and σf is the fatigue strength at a specific number of cycles.
The ultimate strength of the shaft material is given as 140,000 psi.
The empirical factors Na and Nf can be calculated as:
`Na = (σm + σa)/σf and Nf = 2E6/10^6 = 2`
Substituting the values we get, `Na = (0 + 64041/d^2) / 60000 = 1.067/d^2 and Nf = 2`
We can now calculate σw using Soderberg criterion:
`σw = (σm/Na)(σf/Nf) `Mean stress σm can be taken as half of ultimate strength σut = 70000 psi.
Then, `σw = (70000/1.067d^2)(60000/2) = 17630/d^2`
Using De-Goodman criteria, substituting the values of σa/σw and factor m, we get:
`1.5 = [1/Ka] [(E/2E')^(1/m)] = [1/Ka] [(29*10^6)/(2 * 60,000)^(1/3)] `
We can simplify the above equation by substituting Ka and solving for the shaft diameter `d`. `d = 0.187 inch`
Hence, the shaft diameter is 0.187 inch.
Learn more about De goodman equation at
https://brainly.com/question/15201186
#SPJ11
Does anyone know the answer to this
Answers
Answer:
A
Explanation:
Answer:
A
Explanation:
The fuse breaks the circuit if a fault in an appliance causes too much current to flow. The fuse contains a piece of wire that melts easily. If the current going through the fuse is too great,the wire heats up until it melts and breaks the circuit
what is the condition for sampling frequency to reconstruct the information signal ?
Answers
A continuous time-varying 1-D signal is sampled by narrow sampling pulses at a regular rate fr = 1/T, which must be at least twice the bandwidth of the signal. At first, it may be somewhat surprising that the original waveform can be reconstructed exactly from a set of discrete samples.
According to the EWR specifications, ___ is responsible for picking up and disposing of debris or rubbish from
equipment installed by the electrical contractor on the project.
Select one:
a. The general contractor
b. Contracted laborers
c. The electrical contractor
d. none of these
Answers
Answer:
The correct answer is C) Electrical Contractor
Explanation:
EWR refers to Electrical Work Request.
According to the EWR Specifications, the Contractor is responsible for picking up and disposing of debris or rubbish from equipment installed by the electrical contractor on the project.
The EWR specification state that:
For the disposal of building waste materials, and garbage, the contractor shall have on-site enclosed dumpsters or bins and shall regularly eliminate the items referred to above from the site.
Cheers
What signal propagation phenomena causes the diffusion, or the reflection in multiple different directions, of a signal?
Answers
In the radio communication system, multipath is the propagation phenomenon that causes diffusion or reflection in multiple different directions of a signal.
Multipath is a propagation mechanism that impacts the propagation of signals in radio communication. Multipath results in the transmission of data to the receiving antenna by two or more paths. Diffusion and reflection are the causes that create multiple paths for the signal to be delivered.
Diffraction occurs when a signal bends around sharp corners; while reflection occurs when a signal impinges on a smooth object. When a signal is received through more than one path because of the diffraction or reflection, it creates phase shifting and interference of the signal.
You can learn more about signal propagation at
https://brainly.com/question/14452898
#SPJ4
The quality of a two-phase liquid–vapor mixture of refrigerant 134a at 90 lbf/in. 2 with a specific enthalpy of 90 btu/lb is.
Answers
The quality of a two-phase liquid–vapor mixture of refrigerant 134a at 90 lbf/in.2 with a specific enthalpy of 90 btu/lb can be determined using the thermodynamic property tables. The thermodynamic property tables consist of data that provides the thermodynamic properties of the refrigerant in both saturated liquid and vapor states as well as the properties of the refrigerant in the two-phase region.
To determine the quality of the two-phase mixture, it is essential to know the pressure and the specific enthalpy.
Using the thermodynamic property tables, the values for the quality can be calculated.
The quality of the two-phase mixture is given by the formula:
x = (h - hf) / (hg - hf)
Where:
x = Qualityh = Specific Enthalpyhf = Saturated Liquid Enthalpyhg = Saturated Vapor Enthalpy
Substituting the values in the above equation,
we have:x = (90 - 84.42) / (107.9 - 84.42)x = 0.33The quality of the two-phase liquid-vapor mixture of refrigerant 134a at 90 lbf/in.2 with a specific enthalpy of 90 Btu/lb is 0.33.
To know more about liquid–vapor mixture visit:
https://brainly.com/question/30621342
#SPJ11
A new back-up power generator is to be located to serve a total of (6) precision machines in a manufacturing facility. Separate electrical cables are to be run from the generator to each machine. The locations of the (6) machines are P1 = (0,0), P2 = (30,90), P3 = (60,20), P4 = (20,80), P5 = (70,70), and P6 = (90,40). Determine the location for the generator that will minimize the total required length of the electrical cable. (NOTE: Assume rectilinear distance)
Answers
The location for the generator that will minimize the total required length of the electrical cable is (45, 65). Placing the generator at this location ensures that the average distance between the generator and the machines is minimized, reducing the total length of the electrical cable required.
To determine the location for the generator that will minimize the total required length of the electrical cable, we can use the concept of the centroid. The centroid represents the center of mass of a geometric shape or a set of points.
In this case, we need to find the centroid of the given points (machine locations). The centroid can be calculated by taking the average of the x-coordinates and the average of the y-coordinates of the points.
The x-coordinate of the centroid can be calculated as:
x-coordinate = (x1 + x2 + x3 + x4 + x5 + x6) / 6 = (0 + 30 + 60 + 20 + 70 + 90) / 6 = 45
The y-coordinate of the centroid can be calculated as:
y-coordinate = (y1 + y2 + y3 + y4 + y5 + y6) / 6 = (0 + 90 + 20 + 80 + 70 + 40) / 6 = 65
Learn more about average distance here :-
https://brainly.com/question/3841552
#SPJ11
This wired networking standard specifies the order in which data is sent through the network.
Select one:
a. Ethernet
b. WiMAX
c. LTE
d. TCP/IP
Answers
The wired networking standard that specifies the order in which data is sent through the network is Ethernet.
Ethernet is a widely used wired networking standard that defines the protocols and specifications for data transmission over a local area network (LAN). It specifies the order in which data is sent through the network by utilizing the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) algorithm.
The CSMA/CD algorithm ensures that multiple devices connected to an Ethernet network can share the same communication medium without interfering with each other. Before transmitting data, a device using Ethernet listens to the network to detect if it is clear to send data. If the network is busy, it waits for an opportune moment. Once the network is clear, the device sends the data, constantly monitoring for collisions. If a collision occurs (when two or more devices transmit data simultaneously), they stop transmitting, wait for a random period of time, and then retry.
By following this protocol, Ethernet ensures orderly and efficient data transmission within the network, minimizing collisions and maximizing data throughput. It has become the de facto standard for wired local area networks due to its reliability, scalability, and widespread adoption.
Learn more about Ethernet
brainly.com/question/31610521
#SPJ11
Construction engineering differs from other types of civil engineering because it focuses on supervising the creation of the building as well as design.
O A True
O B.False
Answers
Answer:
A. True
Construction engineering focuses on managing the construction process of buildings and infrastructure projects, which involves supervising the creation of the building as well as the design. Construction engineers oversee the construction site, coordinate with different stakeholders, manage the budget, and ensure that the project is completed on time, on budget, and according to the specifications.
One pound of air in a cylinder-piston arrangement undergoes an adiabatic expansion from 200 psia to 50 psia. The initial volume is 4 ft3/lbm. The process is such that PV1.4 is constant. Find the work done and the change in internal energy and temperature of the gas.
Answers
When air undergoes adiabatic expansion, the process is governed by the equation PV^γ = constant, where γ is the ratio of specific heats. In this case, the value of γ for air is 1.4. We are given that one pound of air undergoes an adiabatic expansion from 200 psia to 50 psia, with an initial volume of 4 ft3/lbm and PV^1.4 = constant.
Let's calculate the final volume of the air using the initial and final pressures and the initial volume. Using the formula P1V1^γ = P2V2^γ and substituting the given values, we have: 200(4)^1.4 = 50(V2)^1.4V2 = (200(4)^1.4 / 50)^(1/1.4)V2 = 11.14 ft^3/lbmThe work done by the air is given by the equation W = ∆E + Q, where ∆E is the change in internal energy and Q is the heat added to or removed from the system. Since the process is adiabatic (Q = 0), the work done is equal to the change in internal energy. Let's calculate the work done:W = ∆E = C_v (T2 - T1)where C_v is the specific heat at constant volume, and T1 and T2 are the initial and final temperatures, respectively. The specific heat at constant volume for air is 0.1715 Btu/lbm·R. Let's calculate the final temperature of the air using the initial and final pressures and volumes and the equation P1V1^γ/T1 = P2V2^γ/T2.200(4)^1.4/T1 = 50(11.14)^1.4/T2T2 = T1 * (P2V2^γ / P1V1^γ)T2 = 1183.3 RLet's substitute the values into the equation for work done to get:W = C_v (T2 - T1)W = 0.1715 Btu/lbm·R (1183.3 R - 527.7 R)W = 0.1715 Btu/lbm·R (655.6 R)W = 112.3 Btu/lbmThe change in internal energy is also 112.3 Btu/lbm, since Q = 0. The change in temperature is T2 - T1 = 1183.3 R - 527.7 R = 655.6 R.Answer: The work done by the air is 112.3 Btu/lbm, and the change in internal energy and temperature of the gas are also 112.3 Btu/lbm and 655.6 R, respectively.
To know more about adiabatic expansion, visit:
https://brainly.com/question/4597803
#SPJ11
Consider a cup on a dinning table half filled with water.
State 5 similarities and differences between the fluids that are contained in the cup.
Answers
Answer:
color, shape container, type, amount, temperature
Explanation:
Q1: You have to select an idea developing an application like web/mobile or industrial, it should be based on innovative idea, not just a simple CRUD application. After selecting the idea do the following: 1) How your project will be helpful and what problem this project addresses. (10-Marks) 2) Write down the requirements. (10Marks) 3) List the functional and non-functional requirements of your project. (10marks) 4) Which process model you will follow for this project and why? (10marks) 5) Draw the Level 0, and level 1 DFD of your application. (20marks)
Answers
Answer:
Creating an app is both an expression of our self and a reflection of what we see is missing in the world. We find ourselves digging deep into who we are, what we would enjoy working on, and what needs still need to be fulfilled. Generating an app idea for the first time can be extremely daunting. Especially with an endless amount of possibilities such as building a church app.
The uncertainty has always spawned a certain fear inside creators. The fear of creating something no one will enjoy. Spending hundreds of dollars and hours building something which might not bring back any real tangible results. The fear of losing our investment to a poor concept is daunting but not random. But simple app ideas are actually pretty easy to come by.
Great app idea generation is not a gift given to a selected few, instead, it is a process by which any of us are able to carefully explore step by step methods to find our own solution to any problem. Whether you are a seasoned creator or a novice, we have provided a few recommendations to challenge and aid you as you create your next masterpiece.
if I am right then make me brainliest
The cost to rent a scooter is $15.50 per hour and the cost to rent a watercraft is $22.80 per hour use the expression 15.5 S +22.8 W you The cost to rent a scooter is $15.50 per hour and the cost to rent a water craft is $22.80 per hour use the expression 15.5 S +22.8 W you you
Answers
Complete Question:
The cost to rent a scooter is $15.50 per hour and the cost to rent a watercraft
is $22.80 per hour. Use the expression 15.5s + 22.8w to determine how much it would cost to rent a scooter for 3 hours and a watercraft for 1 hours.
Answer:
$69.39
Explanation:
Given
15.5s + 22.8w
Required
Evaluate, when w = 1 and s = 3
To do this, we simply substitute 3 for a and 1 for w in the given expression.
15.5s + 22.8w becomes..
15.5 * 3 + 22.8 * 1
46.5 + 22.8
69.3
Hence, the cost is $69.30
rosbel or Janette lol baakkaaa
Answers
Answer:
t5g5gtttttttttttttttttttttttttttttttttttttttttttt
Explanation:gt555555555555555555555555555555555555555555555555
Answer:
dawbkjbjwwjhjfbfjewfaekfhawkjndwkja
Explanation: dum*as*
Jay decides to walk home from school today. He lives 3 miles from school and can walk home in 45 minutes. At what rate is Jay traveling?
Answers
Answer: jay is traveling at 4 miles per hour :)
Explanation:
Which statement best explains why pneumatic cylinders need to be smaller than hydraulic cylinders?
The pneumatic system only needs enough room to have an onloff switch installed in order to operate correctly.
The energy in pneumatic power systems is easily transmitted to gases, which absorb the energy of the system and lower its efficiency
The control of the hydraulic system is much more precise and therefore requires a larger cylinder.
The fluid in a hydraulic system has more mass and therefore needs more storage space.
Answers
Answer:
The energy in pneumatic power systems is easily transmitted to gases, which absorb the energy of the system and lower its efficiency.
Explanation:
I did it on edge and got it right.
Answer:
The energy in pneumatic power systems is easily transmitted to gases, which absorb the energy of the system and lower its efficiency
Thanks for points!!! :D
State whether True or False: The initial layers of a deep neural network identify the base features like edges and patterns, and each subsequent hidden layer identifies more complex & composite features.
Answers
It is true that the initial layers of a deep neural network identify the base features like edges and patterns, and each subsequent hidden layer identifies more complex & composite features.
What is the significance of neural networks?Neural networks are also well-suited to assisting humans in solving complex challenges in real-world scenarios. They can learn and model nonlinear and complicated interactions between inputs and outputs; make generalizations and inferences; uncover hidden correlations, patterns, and predictions; and model highly volatile data (such as financial time series data) and variances required to anticipate unusual events (such as fraud detection). As a result, neural networks have the potential to improve decision-making processes in areas such as:Detection of credit card and Medicare fraud.Transportation network logistics optimization.Natural language processing, commonly known as character and speech recognition.Medical and disease identification.Marketing that is targeted.Forecasts for stock prices, currency, options, futures, bankruptcy, and bond ratings.Control systems for robots.Forecasting of electrical load and energy consumption.Process and quality assurance.Identification of chemical compounds.Ecosystem assessment.Computer vision is being used to interpret raw images and movies (for example, in medical imaging and robotics and facial recognition).What is a deep neural network ?A deep neural network is a neural network with more than two layers and a specified amount of complexity. Deep neural networks process data in complex ways by employing advanced mathematical models. In general, a neural network is a system designed to imitate human brain activity, specifically pattern recognition and the flow of data through several levels of simulated neural connections. Deep neural networks are defined by many experts as networks with an input layer, an output layer, and at least one hidden layer in between. In a process known as "feature hierarchy," each layer conducts certain types of sorting and ordering.Dealing with unlabeled or unstructured data is one of the most important applications of highly powerful neural networks. Deep neural networks are also referred to as "deep learning" networks because they represent a subset of machine learning in which technologies based on artificial intelligence strive to classify and order data in ways that go beyond simple input/output protocols.Can learn more about deep neural networks from https://brainly.com/question/28888714
#SPJ4
The formula for calculating risk considering risk perception is ?
Answers
Answer:
risk = probability x loss
Explanation:
For the circuit shown in Figure below:
R1 = 10KOmega, R2= 1MOmega,
R3 = 10KOmega, R4 = 10KOmega, R5 = 150KOmega, R6 = 10KOmega. Find Av=Vo/Vi
Answers
Answer:
Av = -800
Explanation:
The gain to the output of the first op-amp is ...
A1 = -R2/R1 = -1000/10 = -100
The gain of the voltage divider R3/R4 is ...
A2 = R4/(R3+R4) = 10/(10+10) = 1/2
The gain of the second op-amp circuit from the positive terminal to the output is ...
A3 = 1+ R5/R6 = 1 + 150/10 = 16
Then the total circuit gain is ...
Av = A1×A2×A3 = (-100)(1/2)(16)
Av = -800
_____
Additional comment
In the above, we have assumed ideal op-amps, with infinite gain and infinite input impedance. The resistor values used in the calculations are all Kohms, so we can avoid writing unnecessary zeros.
Using the correlation for the second virial coefficient (Pitzer correlation), find the molar volume of acetylene vapour at 247.1 K and 13.5 bar, giving your answer to the nearest cm3/mol. The critical temperature is 308.3 K and the critical pressure of acetylene is 61.39 bar. Take R = 8.314 J/mol-K and the acentric factor for acetylene is 0.187.
Answers
The molar volume of acetylene vapor at 247.1 K and 13.5 bar, using the Pitzer correlation for the second virial coefficient, is approximately 72.5 cm3/mol.
Explanation:
The Pitzer correlation can be used to estimate the second virial coefficient of a gas. The equation is given by B = (RTc)/(Pc) * (1 + m(1 - (T/Tc)^(0.5))) where B is the second virial coefficient, R is the ideal gas constant, Tc is the critical temperature, Pc is the critical pressure, T is the temperature, and m is the acentric factor.
Plugging in the given values and solving for B, we get B = -0.009413 m3/mol. Then, using the ideal gas law, V = RT/P, we can calculate the molar volume as V = (RT)/P = (8.314 J/mol-K * 247.1 K) / (13.5 bar * 10^5 Pa/bar) ≈ 0.0725 m3/mol ≈ 72.5 cm3/mol.
Learn more about the Pitzer correlation here:
https://brainly.com/question/16201302
#SPJ11
If the constant is added to every observation of data then arithmatic mean obtained is
Answers
Answer:
Explanation:
Increased by the constant. Take a very simple case.
4 + 5 + 6 = 15
The mean is 5 (obtained by dividing the total (15) by the number of terms (3).
Now add a constant say 6
4 + 6 = 10
5 + 6 = 11
6 + 6 = 12
Total = 33/3 = 11
So the mean 5 is increased by the constant 6.
Now do the same thing more symbolically.
4 + c
5 + c
6 + c
Total = 15 + 3c
Divide by 3 you get 5 + c
If you want a more formal proof involving n terms, leave a note.
which statement best explains the reason that the middle part of the seatbelt is a better thermal conductor than the plastic part?
Answers
Answer:
Yeah the metal part of the seat belt is a better thermal conductor than the plastic part of the seat belt.
Explanation:
Who is the first presidant of the us?
Answers
Answer:
George Washington was the first president
.4- The wood structure panel roof diaphragm of a warehouse one-story building is shown in plan view. The calculated roof diaphragm shear capacity is 450 lb/ft in the east-west direction. The roof diaphragm is adequately anchored to the shear wall. a) Calculate the unit shear along the south shear walls b) Calculate the unit shear along the north shear wall c) Calculate the unit shear along the diaphragm in the direction of analysis 40'
Answers
The unit shear along the south shear walls is 450 lb/ft.
What is the shear capacity along the south shear walls?The unit shear along the south shear walls of the warehouse one-story building is 450 lb/ft in the east-west direction. Unit shear refers to the shear force per unit length, in this case, per foot, acting on the shear walls. Shear walls play a crucial role in resisting lateral forces and maintaining the structural stability of a building.
In this context, the calculated unit shear of 450 lb/ft indicates the maximum shear force that each foot of the south shear walls can withstand without experiencing excessive deformation or failure. It is important to ensure that the shear walls are designed and constructed to withstand these shear forces adequately.
The adequate anchorage of the roof diaphragm to the shear wall is another important aspect mentioned in the question. Proper anchoring ensures a strong connection between the roof diaphragm and the shear wall, allowing the transfer of shear forces effectively and enhancing the overall structural performance.
By calculating the unit shear, engineers and designers can assess the capacity of the south shear walls to resist the applied forces and ensure the stability and safety of the warehouse building. This information is crucial for designing and evaluating the structural integrity of the building to meet the required safety standards and codes.
Learn more about shear walls
brainly.com/question/32458786
#SPJ11
wassup everyone here is my question...
whats the steps on building a rocket?
jk it would be cool it u included it tho
Answers
Answer:
Step One: Know What Your Rocket Needs to Do. ...
Step Two: Establish Mission Parameters. ...
Step Three: Call in Experts. ...
Step Four: Start Drawing. ...
Step Five: Whittle Down the Possibilities. ...
Step Six: Pick the Best Design.
Explanation:
Hope this helps and thx for tha fwee pts