Hydrogen sulphide gas smells Like _______​

Answer: The answer is B. The number of protons

Explanation:

The correct answer to the given question is option c) Metals.

What were the materials used during the 1960s?

The materials used during the 1960s included metals, ceramics, glasses, semiconductors, polymers, and elastomers.

The 1960s were a period of significant technological advances.

A number of new and innovative materials emerged during this time that would shape the world for decades to com. Metals were the second most used material during the 1960s. During this time, there was significant demand for materials that could withstand high temperatures and pressures, as well as resist wear and tear and corrosion .Metals were used for a wide range of applications, including the construction of aircraft, automobiles, and other machinery.

They were also used in the production of electronic components, such as resistors and capacitors, and for the manufacture of a wide range of consumer goods, from kitchen utensils to jewellery. Metals remain a critical material in today's world, with a wide range of applications in industries ranging from aerospace and automotive to electronics and construction.

#SPJ11

The mole fraction of ethylene glycol is 0.203.

The mole fraction represents the number of moles of a specific component divided by the total number of moles present in the given solution.

It is a method of expressing the concentration of a solution

Mole fraction can be represented by x. Let a solution consists of components A and B then, the mole fraction is

\(Mole fraction of solute, n_A = \frac{n_A}{n_A+n_B}\)

\(Mole fraction of solvent, n_B = \frac{n_A}{n_A+n_B}\)

The molar mass of ethylene glycol = 62 g

Given the mass of ethylene glycol = 2.109 x 10³ g

The molar mass of water = 18 g

Given the mass of water= 2.40×10³ g

No moles of ethylene glycol,  \(n_A\) = \(\frac{2.109 \times 10^3 g}{62 g}\)

                                                =34.02

No of moles of water, \(n_B\) = \(\frac{2.40 \times 10^3 g}{18 g}\) = 133.33

Mole fraction of ethylene glycol = \(x = \frac{n_A}{n_A +n_B}\)  = \(\frac{34.02}{34.02+133.33} = \frac{34.02}{167.35}\)

                                                      =  0.203

Hence, The mole fraction of ethylene glycol is 0.203

Learn more about mole fraction:

https://brainly.com/question/1601411

#SPJ4

Answer:

it s not on periodic table this is not real element

Explanation:

The anticancer agent that is especially prone to induce crystallization of uric acid in the kidney is 5-fluorouracil (5-FU).

5-FU is an antimetabolite chemotherapy drug that is commonly used to treat a variety of cancers, including breast, colorectal, and gastrointestinal cancers. However, one of its side effects is that it can lead to an increased production of uric acid, which can then crystallize in the kidney and cause kidney damage.

This is known as tumor lysis syndrome, which is a medical emergency that requires immediate treatment to prevent serious complications. Patients receiving 5-FU should be closely monitored for signs of kidney problems and treated promptly if necessary.

To know more about Crystallization, visit;

https://brainly.com/question/30670227

#SPJ11

1. What is the state of matter of an ice cube ?

A) Solid

B) Liquid

C) Gas

2. What is the state of matter of water vapour ?

A) Solid

B) Liquid

C) Gas

Answer:

i really dont know

Explanation:

byeeeeeeeeeeeee

The use of cold methanol is important because it is used to recrystallize or solidify the product.

Since, ice bath is also used in nitration of methyl benzoate because in this reaction the concentrated acid like sulfuric acid is used with water and it is very exothermic.

The formation pure solid from the impure solid compound by mixing with hot solvent and form saturated solution. Now, this solution as cools and pure crystal grows when solubility of the compound decreases. This whole process is called re-crystallization.

learn about re-crystallization

https://brainly.com/question/14918321

#SPJ4

The mass defect of the oxygen nucleus is 16 8o 816o. the mass of neutral 16 8o 816o is equal to 15.994914 atomic mass units

8(1.008665)+8(1.007825)

=16.13192

16.13192-15.994914

=.13701 amu

The atomic nucleus is a small, dense region made up of protons and neutrons at the center of an atom, discovered by Ernest Rutherford in 1911, based on Geiger-Marsden's gold leaf experiment in 1909. After the discovery of the neutron in 1932, models of the nucleus composed of protons and neutrons were rapidly developed by Dmitri Ivanenko[1] and Werner Heisenberg. I was.

The cell nucleus carries genes, structures that control and regulate cell activity (such as growth and metabolism) and contain genetic information. Nucleoli are small bodies commonly found within the nucleus. The nucleoplasm is the gel-like matrix in which the core components are suspended.

Learn more about nucleus here

https://brainly.com/question/1268608

#SPJ4

The volume of the helium-filled balloon at STP needed to lift a payload of 500 kg is approximately 431 \(m^{3}\).

To estimate the volume of a helium-filled balloon at STP that can lift a payload of 500 kg, we'll need to consider the densities of both air and helium.

1: Calculate the mass of displaced air.
Since the balloon will displace an equal mass of air, we can set up the equation:
Mass of air displaced = Mass of helium in the balloon + Mass of payload

2: Find the difference in mass between air and helium.
Density = Mass/Volume, so

Mass = Density * Volume.

Since we want to find the volume of the helium-filled balloon, we can rearrange the equation to:
Volume = Mass/Density

3: Calculate the volume of air displaced.
Mass of air displaced = (500 kg) * (1.29 kg/\(m^{3}\) - 0.178 kg/\(m^{3}\))
Mass of air displaced = 500 kg * 1.112 kg/\(m^{3}\)
Mass of air displaced = 556 kg

4: Calculate the volume of the helium-filled balloon.
Volume = Mass of air displaced / Density of air
Volume = 556 kg / 1.29 kg/\(m^{3}\)
Volume ≈ 431 \(m^{3}\)
Therefore, the volume is  431 \(m^{3}\)

To learn more about "helium", visit: https://brainly.com/question/29392730

#SPJ11

Recrystallization plays a crucial role in the cycling of Earth's materials and the flow of energy that drives it. The Earth's materials, including minerals and rocks, are subject to numerous processes that change their chemical composition and physical structure.

Recycling is one of the Earth's most essential material cycling processes. Minerals and rocks are continually recycled on the planet through a variety of geological processes, including recrystallization, melting, and weathering.Recycling is a crucial aspect of the Earth's energy balance since it helps to regulate the amount of energy in the planet's system.

Because the Earth's materials are continuously recycled, they are continually changing form and structure, releasing or absorbing energy in the process.Recycling allows the Earth's materials to store and release energy in various forms, including thermal, kinetic, and electromagnetic energy.

This energy is transferred and transformed as materials are transported throughout the planet, eventually driving the many processes that shape the Earth's surface.Recycling also plays a crucial role in the Earth's biogeochemical cycles, which are responsible for maintaining the planet's habitability.

These cycles include the carbon, nitrogen, and water cycles, which are essential for life on Earth. As materials are recycled, they transport and exchange nutrients and other vital elements, providing the raw materials needed for the biosphere to thrive.

In conclusion, recrystallization is an essential process that drives the cycling of Earth's materials and the flow of energy that sustains life on the planet. It plays a crucial role in regulating the Earth's energy balance and maintaining the biogeochemical cycles that are essential for life.

For more question on recrystallization

https://brainly.com/question/28192438

#SPJ8

Answer: endothermic

Explanation: A chemical reaction or physical change is endothermic if heat is absorbed by the system from the surroundings.

The classification of the given terms are based on general characteristics and it is as follows:

Simple periodic: A pattern or signal that repeats itself identically at regular intervals is referred to as simple periodic. It has a fundamental frequency and harmonic components that are integer multiples of the fundamental frequency.

Complex periodic: A complex periodic signal consists of multiple sinusoidal components with different frequencies and amplitudes. These components combine to create a waveform that repeats itself over time, but not necessarily identically.

Continuous aperiodic: A continuous aperiodic signal does not exhibit any repetitive pattern or periodicity. It does not repeat itself at regular intervals and lacks a fundamental frequency.

Transient aperiodic: A transient aperiodic signal is a non-repetitive signal that occurs for a finite duration. It typically represents a sudden change or event and does not have a repeating pattern.

Combination: A signal can be a combination of any of these types. For example, a signal may have a periodic component with added aperiodic or transient components. In such cases, the signal would exhibit characteristics of both periodic and aperiodic behaviour.

To know more about sinusoidal components,

https://brainly.com/question/32191466

#SPJ4

Explanation:

The claim that hydrogen chloride (HCl) would be much stronger than nitric acid (HNO3) due to opposing dipole forces is incorrect.

Both HCl and HNO3 are strong acids, meaning that they dissociate completely in water to produce H+ ions. The strength of an acid is determined by the degree to which it dissociates in water. In other words, the stronger the acid, the more H+ ions it produces in water.

The dissociation of HCl and HNO3 in water can be represented as follows:

HCl + H2O → H+ + Cl-

HNO3 + H2O → H+ + NO3-

As we can see, both HCl and HNO3 produce H+ ions in water. Therefore, the strength of an acid cannot be solely determined by its dipole forces.

In addition, it's important to note that HCl is a much more volatile and corrosive acid than HNO3. It can cause severe respiratory and skin irritation when it is inhaled or comes into contact with skin. Therefore, switching HNO3 for HCl could be dangerous and should not be done without proper precautions and expert knowledge

Answer:

yes it was a one in four chance

Explanation:

Answer:

This isnt a question

Explanation:

Answer:

this isn’t a question

Explanation:

Not a question

Answer: Possibility of a single replacement reaction

Explanation:

The activity of the series of element is determined by the single replacement reactions. The activity series of element can be used to predict the possibility of a single replacement reaction.

A single replacement reaction is one in which one substance is replacing the other. The replacement of a metallic ion in solution by a metal atom higher in the activity series than the metal in solution falls into this category of reactions.

The reaction is depending on the reactivity of the elements. If the reactivity of the elements is very low, then the reaction very slow, some time reaction can not take place. To get reaction there is some driving force is needed.

The relative position of the two elements in the activity series provides the driving force for this kind of reaction. More active elements undergo readily reaction then less reactive like noble gas elements. It very necessary to elements very active to get react.

To find more about displacement reaction, refer the link below:

brainly.com/question/3172917

#SPJ2

Picaridin is an organic compound that belongs to the class of carboxylic acid amides. Specifically, it is classified as an amide derivative of piperidine. Its chemical structure is 1-piperidinecarboxylic acid 2-(2-hydroxyethyl)-1-methylpropyl ester.

Organic compounds are compounds primarily composed of carbon atoms bonded with other elements such as hydrogen, oxygen, nitrogen, and more. Picaridin contains carbon, hydrogen, oxygen, and nitrogen atoms in its structure, making it an organic compound.

The presence of the carboxylic acid functional group (-COOH) and the amide functional group (-CONH-) in picaridin's structure classifies it as an amide. The piperidine moiety refers to a six-membered ring containing five carbon atoms and one nitrogen atom.

Picaridin is commonly used as an effective insect repellent, serving as an alternative to other insect repellents like DEET. It is known for its ability to repel a variety of biting insects, including mosquitoes, ticks, and flies. Its organic nature and repellent properties make picaridin a valuable compound for personal protection against insect bites in various outdoor activities and regions where insect-borne diseases are a concern

to know more about Picaridin click this link

brainly.com/question/32318841

#SPJ11

Picaridin is an organic compound that belongs to the class of carboxylic acid amides. Specifically, it is classified as an amide derivative of piperidine. Its chemical structure is 1-piperidinecarboxylic acid 2-(2-hydroxyethyl)-1-methylpropyl ester.

Organic compounds are compounds primarily composed of carbon atoms bonded with other elements such as hydrogen, oxygen, nitrogen, and more. Picaridin contains carbon, hydrogen, oxygen, and nitrogen atoms in its structure, making it an organic compound.

The presence of the carboxylic acid functional group (-COOH) and the amide functional group (-CONH-) in picaridin's structure classifies it as an amide. The piperidine moiety refers to a six-membered ring containing five carbon atoms and one nitrogen atom.

Picaridin is commonly used as an effective insect repellent, serving as an alternative to other insect repellents like DEET. It is known for its ability to repel a variety of biting insects, including mosquitoes, ticks, and flies. Its organic nature and repellent properties make picaridin a valuable compound for personal protection against insect bites in various outdoor activities and regions where insect-borne diseases are a concern

to know more about Picaridin click this link

brainly.com/question/32318841

#SPJ11

Answer:

TRUE

Explanation:

The blood alcohol content is also known as the blood alcohol level or the blood alcohol concentration. It is defined as the measurement of the alcohol intoxication in the body and is used for the legal or the medical purposes.

When the BAC increases in the person's body, the person started to loose clear vision, loss of short term memory, poor muscle coordination,  impaired perception and face difficulty in concentrating. Thus it becomes very difficult for a person to drive a car or ride a bike whose BAC has increased.

The driver cannot properly judge the distances between the vehicle and the speed of the vehicle.

Hence the answer is TRUE.

Answer:

100 trillion atoms are in one cell and  so just find how many cells are in a chair and then take 100xthe number and you get your answer

Explanation:

There are uncountable atoms which are present in a chair depending on it's size.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/30898688

#SPJ2

Answer:

3.0059572661984113e-24

Explanation:

Answer:

15 millimeters

Explanation:

the other answer choices are too large.

Answer:

15 millimeters

Explanation:

The other options are too long.

Remember:

to balance equations in chemistry, you have to count the amount of atoms there are in a chemical eg:

the number of atoms in H20 are:

2 atoms of hydrogen

1 atom of oxygen (when there are no numbers by the letter it means that theres only 1 atom of it!)

The number next to a letter means the number of atoms thta it is made up of and atoms are the things it is made up of eg chocolate the ingredients are cocoa, milk and sugar ect so just like that CO2, H20 an ALL types of chemicals are made up of atoms. BUT WE WANT TO KNOW HOW MANY ATOMS- so u need to list these for all the 4 chemicals in the equation.

Im telling u this so that u can list out all of the atoms in each chemical (I will do the first two)

CH2=

1 atom of Carbon

2 atoms of hydrogen

O2=

2 atoms of oxygen

once u have listed out all the atoms from EACH of the chemicals in ur question (CH2, 02, CO2 and H20) categorise them like this

CH2

Carbon=........ Atoms

Hydrogen= .......Atoms

(Make sure the table is like vertical like lemme show u as an example. ATTACHED IS AN EXAMPLE OF WHAT UR WORK SHOULD BE SET OUT AS)

When you see the addition sign it means that elements like oxygen and hydrogen etc..basically add them up like CO2 + H20 theres oxygen in both so add up the atoms of oxygen FOR JUST CO2 AND H20 like  if there was one atom of oxygen in CO2 and 2 in h20 add them up and it makes three (1+2=3). 1 oygen  atom from CO2 plus 2 oxygen atoms in H20 that makes 3 atoms for both the chemiclas together (THIS WAS JUST AN EXMAPLE THERE ARENT ACTUALLY 2 ATOMS IN H20 OR 1 ATOM IN C02)

Look at the similarities OF ATOM NUMBERS like if CH2 has one atom of Carbon, CO2 ALSO has one atom of carbon which is fine BUT when it comes to differences u need to cross those out and PUT THAT NUMBER on both sides like if O2 has  2 atoms of oxygen and h20 has 1 that means that they need to be balanced like they either both need to be 1 atom or 2 atoms so for that u need to look attachment sorry u just need to cross them out and make them the same

make sure to write about what atoms are, to list out atoms for each chemical, compare the chemicals in both word chemicals and make them even!

Explanation:

Answer: It will take 68 days for the palladium to decay.

Explanation: ima smart dude

Of the four aqueous solutions listed, the one with the lowest freezing point and the highest solution boiling point is 0.050 M NaCl. This is because NaCl is a strong electrolyte, meaning it dissociates completely into ions in solution, and thus has the greatest effect on lowering the freezing point and raising the boiling point compared to the other solutions, which are weaker electrolytes or nonelectrolytes.

Solution is a homogeneous mixture consisting of two or more substances. The substance which is present in a smaller amount in a solution is called the solute or solute, while the substance which is present in a greater amount than the other substances in the solution is called the solvent or solvent.

Learn More About Solutions at https://brainly.com/question/3184550

#SPJ4

Answer:

λ = 6x10^-5 m

Explanation:

c = λf

3.00x10^8 = 5.00x10^12 x λ

λ = 6x10^-5 m

The type of intermolecular force that arises from instantaneous dipole moments is e. London Dispersion Forces. These forces occur due to temporary fluctuations in electron distribution, which create temporary dipoles that attract other nearby molecules.

London dispersion forces, also known as van der Waals forces, are the weakest type of intermolecular force. They arise from the fluctuations in the electron density in atoms and molecules.

When electrons are moving, they create temporary dipoles or instantaneous dipoles. These temporary dipoles attract each other and create an attractive force between the molecules, which is the London Dispersion Force. The strength of this force increases with the number of electrons in the molecule.

For more question on intermolecular force click on

https://brainly.com/question/13588164

#SPJ11