In passage 2, which is a logical inference of why the emancipation proclamation did not free all enslaved people

Answer:

True

Explanation:

It's just because of the processing

4.32 megajoules or 4,320,000 Joules

First we need to understand what a joule is.

A joule is a measure of energy, and is equal to the watt.

1 Joule = 1 Watt, 1 kJ = 1kW

Finding the total amount of energy a supply can produce is the same for Watts and Joules. Volts and Amps are measured per second, so if you measure 120V from a conductor, thats 120V per second.

A 100Ah battery can produce 100A per hour, and there are 3600 seconds in an hour.

Energy = Joules = Volts * Amps * Time

3600 * 100A * 12V = 4.32 megajoules (4,320,000 J)

the same number can also be found this way:

100A * 12V = 1200 * 3600 = 4.32 megajoules

Answer:

A) return.

A return is a separate piece attached to the rear edge of a countertop that extends it vertically to meet the wall. It is used to create a finished look and to protect the wall from water and other spills that may occur on the countertop.

Answer:

15 000 000 Ohms

Explanation:

1 Mega Ohm = 1 000 000 Ohms

So,

15 Mega ohms =15 000 000 Ohms

The main advantage of multiprogramming is that it enables the efficient use of system resources by allowing multiple programs to run simultaneously. It allows the CPU to switch between different programs and execute them concurrently, which maximizes CPU utilization and reduces idle time.

It would be difficult to design a multitasking operating system without multiprogramming, as it would limit the efficient use of system resources. A multitasking operating system needs to be able to manage multiple programs simultaneously, and multiprogramming is one of the most efficient ways to achieve this. Without multiprogramming, the CPU would have to wait for each program to finish before executing the next program, which would result in a lot of idle time and reduced system efficiency.

You can learn more about multiprogramming at

https://brainly.com/question/30725501

#SPJ11

Answer:

A tax is a monetary payment without the right to individual consideration, which a public law imposes on all taxable persons - including both natural and legal persons - in order to generate income. This means that taxes are public-law levies that everyone must pay to cover general financial needs who meet the criteria of tax liability, whereby the generation of income should at least be an auxiliary purpose. Taxes are usually the main source of income of a modern state. Due to the financial implications for all citizens and the complex tax legislation, taxes and other charges are an ongoing political and social issue.

I dont know I asked this to

Explanation:

There are two turning points (-1,6.167) and (2,1.617) in the graph of the given function y = x³/3-x²/2-2x+5.

Turning points are locations on a graph when the direction shifts from downward to upward.

The graph for the given function y = x³/3-x²/2-2x+5 is attached please have a look at it. Here the turning point is at the minimum point in the graph of a given function.

As per the given graph,

There are two turning points (-1,6.167) and (2,1.617) in the graph

Thus, there are two turning points (-1,6.167) and (2,1.617) in the graph of the given function y = x³/3-x²/2-2x+5.

To learn more about the turning points click here:

https://brainly.com/question/2193177

#SPJ1

Answer: A sample of the representative outcomes or sequences of events for all possible consequences of a model is called a scenario.

The incidence of nonconformance in Southstar Airlines that is typical of their entire fleet of airplanes is needed. We have been given that in one month, 45 preflight inspections were performed on an airplane at Southstar Airlines, 15 nonconformances were noted and each inspection checks 50 items.

Assuming 2 sigma off-centering, what sigma level does Southstar maintain?

From the given, the nonconformance rate is calculated by taking the ratio of the number of nonconformances to the number of items inspected.

Nonconformance rate = 15/ (45 * 50) = 0.0066667 (approx)

Now, we can calculate the Z-score by using the standard normal distribution table

Z-score = 2sigma off-centering = 2

looking up a Z-score table we obtain that 0.0066667 corresponds to 2.11 standard deviations or 2.11 sigma level approx.

Southstar Airlines maintains a sigma level of about 2.11 if this incidence of nonconformance is typical of their entire fleet of airplanes.

To know more about performed visit :

https://brainly.com/question/33069336

#SPJ11

Answer:

The percentage of recycling in high socioeconomic localities is 11.02%.

Explanation:

Since in high socioeconomic localities, 10% of paper is recycled, 12% of plastic, 1.7% of fabrics, 1.2% of rubbers, 0.9% of metals, 3.5% of glass, 33% of food wastes, 35% soil and 1.9% miscellaneous, to determine the average recycling percentage the following calculation must be performed:

(10 + 12 + 1.7 + 1.2 + 0.9 + 3.5 + 33 + 35 + 1.9) / 9 = X

99.2 / 9 = X

11.02 = X

Therefore, the percentage of recycling in high socioeconomic localities is 11.02%.

**`octalToDecimal.py`**:

```python

def octal_to_decimal(octal):

   decimal = 0

   power = 0

   while octal != 0:

       digit = octal % 10

       decimal += digit * (8 ** power)

       power += 1

       octal //= 10

   return decimal

octal_number = input("Enter an octal number: ")

decimal_number = octal_to_decimal(int(octal_number))

print("Decimal representation:", decimal_number)

```

**`decimalToOctal.py`**:

```python

def decimal_to_octal(decimal):

   octal = 0

   power = 0

   while decimal != 0:

       digit = decimal % 8

       octal += digit * (10 ** power)

       power += 1

       decimal //= 8

   return octal

decimal_number = input("Enter a decimal number: ")

octal_number = decimal_to_octal(int(decimal_number))

print("Octal representation:", octal_number)

```

These scripts utilize algorithms similar to the ones used in the `binaryToDecimal` and `decimalToBinary` scripts. In `octalToDecimal.py`, the octal number is divided by 10 iteratively to extract each digit, which is then multiplied by the corresponding power of 8 and added to the decimal representation.

Similarly, in `decimalToOctal.py`, the decimal number is divided by 8 iteratively to obtain the octal digits, which are multiplied by the corresponding power of 10 and added to the octal representation.

By employing these scripts, you can conveniently convert numbers between octal and decimal representations using basic arithmetic operations.

For more such questions on octal, click on:

https://brainly.com/question/30546698

#SPJ8

The MIPS assembly language program based on the question prompt is given below:

.data

input: .space 101     # allocate space for string input

prompt: .asciiz "Enter a string: "

.text

main:

   li $v0, 4          # print prompt

   la $a0, prompt

   syscall

   li $v0, 8          # read input string

   la $a0, input

   li $a1, 100

   syscall

   move $t0, $zero    # initialize index to 0

   li $t1, 1          # initialize letter A or a to 1

   li $t2, 26         # initialize letter Z or z to 26

loop:

   lb $t3, ($a0)      # load byte from input

   beqz $t3, exit     # if byte is 0 (end of string), exit loop

   addi $a0, $a0, 1   # increment input pointer

   blt $t3, 65, loop  # if byte < 'A', continue to next byte

   bgt $t3, 122, loop # if byte > 'z', continue to next byte

   bgt $t3, 90, check_lower # if byte > 'Z', check if lower case letter

   subi $t4, $t3, 64  # convert letter A to 1, B to 2, etc.

   j print_num

check_lower:

   blt $t3, 97, loop  # if byte < 'a', continue to next byte

   subi $t4, $t3, 96  # convert letter a to 1, b to 2, etc.

print_num:

  sb $t4, ($t0)     # store converted letter in memory

   addi $t0, $t0, 1   # increment index

   j loop

exit:

   li $v0, 10         # exit program

   syscall

Read more about programs here:

https://brainly.com/question/1538272

#SPJ1

The given statement that says personal and fatigue allowances can include amounts for the effects of lighting, heat and humidity, and noise is true. Read on to learn more.

The statement is accurate. Personal and fatigue allowances refer to the amount paid to employees who work in conditions that may cause personal discomfort or stress. This is intended to compensate the worker for the discomfort caused by factors such as heat, light, humidity, and noise.

This is particularly true in cases where such discomfort is unavoidable, for example in hazardous areas such as construction sites and manufacturing plants.

The personal and fatigue allowances are usually paid to compensate for the consequences of working in such environments, which can include hearing loss, vision impairment, respiratory problems, or other illnesses resulting from extended exposure to specific environmental factors.

Therefore, personal and fatigue allowances can include amounts for the effects of lighting, heat and humidity, and noise. The primary goal of such allowances is to promote a safe and healthy working environment, and to ensure that employees can work comfortably and productively, without experiencing undue stress or discomfort, that could have an adverse effect on their work performance.

To know more about fatigue visit:

https://brainly.com/question/17754080

#SPJ11

Answer:

dddddddddddddddddddddddddddddddddddddd

Explanation:

The correct answer is a) Here is a diagram of the milling circuit with labels: The product from the SAG mill is fed to the two ball mills in parallel, with the product from the ball mills being combined and classified in cyclones. The underflow from the cyclones is recycled, and the overflow goes to the flotation circuit.

To calculate the mass rate of each size fraction in each stream, we can start with the total feed rate of 1,500 t/hr. Since 25% of the feed is below 75 microns, that means 75% of the feed is above 75 microns. Of that 75%, 50% will be broken down in the SAG mill to below 75 microns, while the remaining 50% will be broken down in the two ball mills in parallel. Therefore: Mass rate of particles above 75 microns in feed = 1,500 x 0.75 = 1,125 t/hr Mass rate of particles below 75 microns in feed = 1,500 x 0.25 = 375 t/hr Mass rate of particles above 75 microns in SAG mill product = 1,125 x 0.5 = 562.5 t/hr Mass rate of particles below 75 microns in SAG mill product = 1,125 x 0.5 + 375 = 937.5 t/hr Mass rate of particles above 75 microns in each ball mill product = 562.5 / 2 = 281.25 t/hr Mass rate of particles below 75 microns in each ball mill product = 375 / 2 = 187.5 t/hr Mass rate of particles above 75 microns in combined ball mill product = 562.5 t/hr Mass rate of particles below 75 microns in combined ball mill product = 375 t/hr + 187.5 t/hr = 562.5 t/hr Mass rate of particles above 75 microns in cyclone overflow = 562.5 t/hr x 0.95 = 534.38 t/hr (assuming a 5% bypass) Mass rate of particles below 75 microns in cyclone overflow = 562.5 t/hr x 0.05 + 375 t/hr x 0.95 = 393.75 t/hr (assuming a 5% bypass) Mass rate of particles above 75 microns in cyclone underflow/recycle = 562.5 t/hr x 0.05 = 28.13 t/hr Mass rate of particles below 75 microns in cyclone underflow/recycle = 375 t/hr x 0.05 + 187.5 t/hr = 205.63 t/hr To calculate the feed rate to each ball mill, we can use the mass rate of particles below 75 microns in the combined ball mill product, which is 562.5 t/hr. Since there are two ball mills in parallel, the feed rate to each ball mill will be: Feed rate to each ball mill = 562.5 t/hr / 2 = 281.25 t/hr Finally, to calculate the percentage passing 75 microns in the circuit product.

To learn more about SAG mill click on the link below:

brainly.com/question/22282127

#SPJ1

Given that an object is being acted upon by three forces and moves with a constant velocity. One force is 60.0 N along the +x-axis, and the second is 75.0 N along the +y-axis.Let F1 = 60.0 N act along x-axis and F2 = 75.0 N act along y-axis and F3 = ? be the magnitude of the third force acting on the object.Let the direction of F3 force makes an angle θ with the x-axis. Here, the direction of the resultant force is making an angle of θ with the +x-axis.

If F is the resultant force of F1 and F2, then F makes an angle of 53.13º with the x-axis.θ = tan-1 (75.0 N/60.0 N)= 53.13ºNow, we can find the resultant force using Pythagoras Theorem; that is,F = √(F1² + F2²)F = √((60.0 N)² + (75.0 N)²)F = √(3600 N² + 5625 N²)F = √9225 N²F = 96.04 NThe magnitude of the third force is 96.0 N. Thus, the correct option is (d) 96.0 N.

To know more about object visit:

https://brainly.com/question/31018199

#SPJ11

Answer:

the curve will flatten due to the supply and demand theory.

Answer:

The answer is below

Explanation:

Given that:

ρ = 800 kg/m3, c = 600 J/kg-K,  k = 40 W/m-K, Initial temperature = Ti = 1150,

Environment temperature = T = 450 K, Final temperature = T∞ = 325 K

Diameter = 10 mm = 0.01 m, A = 6

The estimated time for cooling process (t) is given as:

\(t=\frac{\rho dc}{hA} ln\frac{T_i-T_\infty}{T-T_infty}=\frac{7800*0.01*600}{25*6} ln\frac{1150-325}{450-325}\\ \\t=589\ s\\t=0.1635\ h\)

The estimated cooling time is 589 s

In the case above,  poor connection at the pressure cycling switch  and also a faulty A/C clutch coil could be the cause.

The cause that hinders the A/C Compressor from engaging are:

Note that the pressure switches is known to be one that control the on/off function of any kind of AC compressor and as such, if there is switch failure, it can hinder the AC compressor from functioning at all.

Therefore, technician A and B are correct.

Learn more about refrigerant pressure from

https://brainly.com/question/10054719

#SPJ1

Answer:

If we were to put a website here on Brainly, the moderators will delete it

Explanation:

Please trust me on this because the moderators delete a lot of things. They have been deleting people's answers for some odd reason saying it goes against their "honor code" but whatever

In this situation, both technicians could be correct. "Dog tracking" refers to a situation where the rear wheels of a vehicle do not track properly with the front wheels, resulting in the vehicle drifting slightly to one side or the other while driving straight.

This can be caused by several factors, including worn or misaligned suspension components, damaged tires, or an issue with the vehicle's frame.

Technician A suggests that a broken center bolt could be causing the issue. The center bolt is a component of the leaf spring suspension system, and if it were broken, it could cause the rear axle to shift out of alignment, resulting in dog tracking.

Technician B suggests that defective rear shock absorbers could be the cause. Shock absorbers help control the movement of the suspension system, and if they are worn or damaged, they may not be able to keep the rear axle in proper alignment, leading to dog tracking.

Ultimately, the best way to determine the cause of the issue would be to have the vehicle inspected by a qualified technician. They can check the suspension components, tires, and frame to identify any issues that may be contributing to the problem and recommend the appropriate repairs.

Learn more on dog tracking here:

https://brainly.com/question/8826151

#SPJ11

Answer:

8*10000+3*1000+1*00+2*10+2

Explanation:

Answer:

Let's break down the given information to deduce the signal:

a) () is a real signal.

This tells us that the signal is not complex.

b) () is periodic with period = 4, and it has Fourier series coefficients.

This means that the signal can be represented by its Fourier series.

c) = 0 for || > 1.

This means that the signal is zero outside the interval [-1, 1].

d) The signal with Fourier coefficients = −/2− is odd.

This tells us that the signal is odd, meaning that () = −(), where () is the Fourier series coefficients.

Putting all the information together, we can write the Fourier series of the signal as:

() = /2 + ∑ (−1)^n+1 /n sin(nπ/2) e^(j nω_0 t)

where ω_0 = 2π/4 = π/2.

Now, we can deduce the signal within a sign factor:

() = -1 + sin(π/2)t - sin(3π/2)t + sin(5π/2)t - ...

Therefore, the signal () is a square wave with period 4 and amplitude 2, alternating between -2 and 0 at the odd half-integers.

Answer:

A. The biceps muscle contracts while the triceps muscle relaxes. Only then can the forearm move up to lift the mug.

Explanation:

Skeletal muscle is also known as voluntary muscle and it can be defined as a type of muscle connected with the skeleton by tendons, so as to form a mechanical system that enables the movement of the limbs and other body parts with respect to another.

Generally, skeletal muscles are only found in vertebrates.

The muscles in the arm work to lift a mug of coffee to your lips when the biceps muscle contracts while the triceps muscle relaxes.

Basically, the only way the forearm move up to lift a mug for example, is through the contraction of the biceps muscle and the relaxation of the triceps muscle.

This ultimately implies that, the elbow joint is straightened or bent due to the actions of the biceps muscle and triceps muscle against each other.

Answer:A

Explanation:

got it right on plato

Answer:

See attachment for chart

Explanation:

The IPO chart implements he following algorithm

The expressions in bracket are typical examples

Input

Input Number (5, 4.2 or -1.2) --- This will be passed to the Processing module

Processing

Assign variable to the input number (x)

Calculate the square (x = 5 * 5)

Display the result (25) ----> This will be passed to the output module

Output

Display 25

The state of  refrigerant that is capable of absorbing the most heat is the vapor state.

In this state, the refrigerant exists as a gas and has a higher heat-absorbing capacity compared to its liquid state.

When a refrigeration system operates, the refrigerant begins its cycle as a low-pressure vapor. As it passes through the evaporator coil, the refrigerant absorbs heat from the surrounding environment, such as the air or water being cooled. The vapor refrigerant undergoes a phase change and turns into a high-pressure, high-temperature gas.

The ability of the vapor refrigerant to absorb heat is primarily attributed to its latent heat of vaporization. Latent heat refers to the energy absorbed or released during a phase change without a change in temperature. During vaporization, the refrigerant absorbs a significant amount of heat energy from the surroundings, resulting in efficient heat transfer and cooling.

By utilizing the vapor state, refrigeration systems can effectively absorb heat from the desired area and transfer it to the condenser for release, facilitating the cooling process and maintaining desired temperatures in various applications such as air conditioning, refrigeration, and heat pumps.

Learn more about refrigeration brainly.com/question/13002119

#SPJ11

Nacelle is a French loanword is to describe the housings for aircraft engines, wind turbine generators, and the Enterprise's warp drives.

Generally speaking, a "nacelle" is an aerodynamic enclosure or housing that is used to describe an aircraft, wind turbine, or spacecraft's engine, generator, or gearbox.

The nacelle, which is said to be found at the top of the tower of a wind turbine, houses the generator, gearbox, and other vital parts of the turbine.

To reduce drag and increase the effectiveness of the turbine, the nacelle is aerodynamically built. For upkeep and repairs, it also offers a secure, contained environment. When it comes to jet engines in airplanes, the nacelle provides a similar function by acting as an aerodynamic housing for the engine and other equipment.

Find more exercises that includes the french loanword Nacelle;

https://brainly.com/question/8994222

#SPJ1