What is a orgasm that kills and eats other orgasms for food called?

A. Host

B. Parasite

C. Predator

D. Prey

Despite the fact that it was first challenging for me to determine whether a change was physical or chemical, this lesson provided me with the knowledge I needed.

This course has promoted a deeper comprehension of the universe and its guiding principles. Although it was originally difficult for me to tell whether a change was physical or chemical, this lesson gave me the knowledge I needed to know. Now that I know this, I can relate to other attributes, and I think my improved skill will be useful in future units as well.

The CPI, which measures inflation, ensures a healthy economy by keeping inflation rates low. But when the rate of inflation increases quickly, it may have adverse economic repercussions such as diminished purchasing power, higher interest rates, slower economic growth, and others.

To learn more about reflection refer to:

https://brainly.com/question/3811188

#SPJ1

Answer:

4.80×10³ years

Explanation:

Let the original amount (N₀) of ²²⁶Rn = 1 g

Therefore,

12.5% of the original amount = 12.5% × 1 = 12.5/100 × 1 = 0.125 g

Next, we shall determine the number of half-lives that has elapse. This can be obtained as follow:

Original amount (N₀) = 1

Amount remaining (N) = 0.125 g

Number of half-lives (n) =?

N = 1/2ⁿ × N₀

0.125 = 1/2ⁿ × 1

0.125 = 1/2ⁿ

Cross multiply

0.125 × 2ⁿ = 1

Divide both side by 0.125

2ⁿ = 1/0.125

2ⁿ = 8

Express 8 in index form with 2 as the base

2ⁿ = 2³

n = 3

Thus, 3 half-lives has elapsed.

Finally, we shall determine the time taken for only 12.5% of the original sample of ²²⁶Rn to remain.

This can be obtained as follow:

Half-life (t½) = 1.60×10³ years

Number of half-lives (n) = 3

Time (t) =?

t = n × t½

t = 3 × 1.60×10³

t = 4.80×10³ years.

Thus, it will take 4.80×10³ years for 12.5% of the original sample of ²²⁶Rn to remain.

The solubility of many substances increases with temperature, there are exceptions. Some substances exhibit a decrease in solubility with temperature due to specific interactions or changes in solute-solvent interactions at higher temperatures.

The increase in solubility of many substances with temperature can be attributed to the effect of temperature on the kinetic energy and intermolecular interactions of molecules.

On a microscopic scale, an increase in temperature corresponds to an increase in the kinetic energy of molecules. As the kinetic energy increases, the molecules move more rapidly and collide with each other and with the solvent molecules more frequently and with greater force.

These increased collisions and kinetic energy result in enhanced molecular interactions and overcome the forces holding the solute particles together. This increased energy disrupts the intermolecular forces within the solute, allowing the solvent molecules to surround and interact more effectively with the solute particles, leading to greater solubility.

Additionally, an increase in temperature can cause solvent molecules to move more freely, reducing their cohesion and allowing them to interact more readily with solute particles.

for more questions on  solubility

https://brainly.com/question/24057916

#SPJ8

From the calculations, the change in energy is - 190 J.

From the first law of thermodynamics, the energy is neither created nor destroyed but is transformed from one form to another.

From the law;

U = q + w

U = internal energy

q = heat

w = work

Since work is done on the surroundings and the gas absorbs heat then;

U = 132 J - 322 J

U = - 190 J

Learn more about thermodynamics:https://brainly.com/question/1368306

#SPJ1

The most likely explanation for the given observations is that the crystals lose water when heated, resulting in a transition from crystals to a powdery substance and a decrease in mass after cooling. Option A

When certain substances contain water molecules as part of their crystal structure, heating them can cause the water molecules to evaporate, leading to the loss of water. This can result in a change in the physical properties of the substance, such as a transition from crystalline to powdery form.

The absence of condensation or other visible changes inside the test tube suggests that the substance is not reacting with the air or giving off a colorless gas. If such reactions were occurring, there would likely be observable changes or reactions taking place.

The decrease in mass after cooling can be attributed to the loss of water molecules. Water has mass, and when it evaporates, it escapes from the test tube, causing a reduction in the overall mass of the substance.

Option A

For more such questions on transition visit;

https://brainly.com/question/2879928

#SPJ8

6.02 x \(10^{20\) formula units of MgCl₂ is equal to 0.1 moles of MgCl₂.

To convert formula units of MgCl₂ to moles of MgCl₂, we need to use Avogadro's number, which relates the number of formula units to the number of moles.

Avogadro's number (NA) is approximately 6.022 x 10^23 formula units per mole.

Given that we have 6.02 x 10^20 formula units of MgCl₂, we can set up a conversion factor to convert to moles:

(6.02 x 10^20 formula units MgCl₂) * (1 mol MgCl₂ / (6.022 x 10^23 formula units MgCl₂))

The formula units of MgCl₂ cancel out, and we are left with moles of MgCl₂:

(6.02 x 10^20) * (1 mol / 6.022 x 10^23) = 0.1 mol

Therefore, 6.02 x 10^20 formula units of MgCl₂ is equal to 0.1 moles of MgCl₂.

It's important to note that this conversion assumes that each formula unit of MgCl₂ represents one mole of MgCl₂. This is based on the stoichiometry of the compound, where there is one mole of MgCl₂ for every one formula unit.

Additionally, this conversion is valid for any substance, not just MgCl₂, as long as you know the value of Avogadro's number and the number of formula units or particles you have.

For more such questions on MgCl₂ visit:

https://brainly.com/question/26311875

#SPJ8

Mass of \($\mathrm{Na}{2} \mathrm{CO} 3$\) required \($=0.55 \mathrm{~g}$\)

The mass 0.120M HCI:

Moles of \($\mathrm{HCl}$\)reacted \($=0.120 \times 21.6 / 1000=0.00260$\)

according to balanced reaction, \($\mathrm{HCl}$ and $\mathrm{Na} 2 \mathrm{CO} 3$\) reacts in \($2: 1$\) the ratio

moles of \($\mathrm{Na} 2 \mathrm{CO} 3$\)required \($=0.00260 \times 2=0.00520$\)

convert moles to mass

mass \($=$\)moles \($\times$\)molar mass

mass \($=0.00520 \times 106.0$\)

mass \($=0.55 \mathrm{~g}$\)

mass of \($\mathrm{Na} 2 \mathrm{CO} 3$\)required \($=0.55 \mathrm{~g}$\)

Mass 0.120M HC is \($=0.55 \mathrm{~g}$\)

To learn more about Molar Mass, refer to:

https://brainly.com/question/837939

#SPJ9

Answer:

Density of liquid = 5103.5 g/mL

Explanation:

Given data:

Density of liquid = ?

Mass of liquid = 2909 g

Volume of liquid = 0.57 gal

Solution:

First of all we will convert the volume into mL.

Volume of liquid = 0.57 gal × 3785 mL/1 gal

Volume of liquid = 2157.68 mL

Now we will calculate the density.

d = 2909 g/0.57 gal

d = 5103.5 g/mL

The metal X has an approximate molar mass of 42.36 g/mol and the metal is most likely calcium.

The molar mass of the metal carbonate XCO₃ and identify the metal X, we need to calculate the number of moles of XCO₃ and CO₂ using the given masses and molar masses.

The molar mass of CO₂ (carbon dioxide) is 12.011 g/mol (for carbon) + 2 * 15.999 g/mol (for oxygen) = 44.01 g/mol.

The number of moles of CO₂ can be calculated using the formula:

moles of CO₂ = mass of CO₂ / molar mass of CO₂

moles of CO₂ = 0.855 g / 44.01 g/mol

moles of CO₂ ≈ 0.01944 mol

Since the reaction stoichiometry is 1:1 between XCO₃ and CO₂, the number of moles of XCO₃ is also approximately 0.01944 mol.

molar mass of XCO₃ = mass of XCO₃ / moles of XCO₃

molar mass of XCO₃ = 2.012 g / 0.01944 mol

molar mass of XCO₃ ≈ 103.38 g/mol

The molar mass of XCO₃ is approximately 103.38 g/mol.

To determine the metal X:

molar mass of X = molar mass of XCO3 - molar mass of CO3

molar mass of X = 103.38 g/mol - (12.011 g/mol + 3 * 15.999 g/mol)

molar mass of X ≈ 42.36 g/mol

Metal X is most likely Calcium that has a molar mass of 40 g/mol

Learn more about molar mass at: https://brainly.com/question/837939

#SPJ1

Answer:

The function of root hairs is to collect water and mineral nutrients that are present in the soil and take this solution up through the roots to the rest of the plant. As root hair cells do not carry out photosynthesis they do not contain chloropla

Explanation:

Root hairs lack chloroplasts since they don't make food. These are intended to draw water and minerals from the soil.

Single tubular root cells make up root hair cells. Their unique lateral elongation boosts the root system's contact surface with the soil. Water and nutrients are mostly taken up by root hairs from the rhizosphere.

This implies that they lack chloroplasts. Long projections on root hair cells expand the space that the plant can use to collect water and minerals.

They have a wide surface area for water absorption and are long and thin so they can pass through soil particles. Osmosis transports water from the earth to the cytoplasm of the root hair cell.

Thus, the chloroplast is missing in root hair cell.

To learn more about root hair cells follow the link below;

https://brainly.com/question/18830324

#SPJ2

In the reaction that is shown in the question;

1) Dichromate ion is reduced while tin II ion is oxidized

2) Fe II is oxidized while  nitrate ion is reduced.

We know that oxidation has to do with the loss of electrons. Thus we say that a specie has been oxidized if the specie looses electrons and we say that a specie has been reduced if the specie gains electrons. The species that is oxidized in a reaction is the oxidizing agent while the specie that is reduced in the reaction is a reducing agent.

Let us note that the procedures of oxidation and reduction does occur at the same time and when this happens, we have a specie whose oxidation number is increased and we say that it has been oxidized while the other specie has received some new electrons and has been said to be reduced.

Learn more about redox:https://brainly.com/question/13978139

#SPJ1

Given options (ii and iv) Steam and oxygen are pure substances.

Pure substances include things like water, air, and nitrogen that have a constant chemical composition throughout. One element or compound does not necessarily make up a pure substance.

The number of different elements and/or compounds that make up a substance can help you determine whether it is pure. It is a pure substance if it only consists of that one type of element or compound.

A form of matter known as a pure substance has properties that are constant throughout the sample and a constant composition that is the same everywhere.

To know more about pure substances visit:

https://brainly.com/question/24462192

#SPJ1

The molar mass of MgCrO4 is approximately 140.30 g/mol.

To determine the molar mass of MgCrO4 (magnesium chromate), we need to calculate the sum of the atomic masses of each individual element in the compound.

The chemical formula MgCrO4 indicates that the compound consists of one magnesium atom (Mg), one chromium atom (Cr), and four oxygen atoms (O).

The atomic masses of the elements can be found on the periodic table:

Magnesium (Mg) has an atomic mass of approximately 24.31 g/mol.

Chromium (Cr) has an atomic mass of around 51.99 g/mol.

Oxygen (O) has an atomic mass of about 16.00 g/mol.

Now, we can calculate the molar mass of MgCrO4 by summing up the atomic masses of each element, considering the respective subscripts:

Molar mass = (Atomic mass of Mg) + (Atomic mass of Cr) + 4 × (Atomic mass of O)

Molar mass = (24.31 g/mol) + (51.99 g/mol) + 4 × (16.00 g/mol)

Molar mass = 24.31 g/mol + 51.99 g/mol + 64.00 g/mol

Molar mass ≈ 140.30 g/mol

for more such questions on mass

https://brainly.com/question/24191825

#SPJ8

The total number of moles of reactants and products in the chemical reaction given is 9 moles

The total number of mole of reactants and products in the chemical reaction can be obtained as follow:

2H₂S + 3O₂ -> 2H₂O + 2SO₂

The following were obtained from the above equation:

Total number of mole = Mole of reactants + mole of products

Total number of mole = 5 mole + 4 moles

Total number of mole = 9 moles

Thus, we can say that the total number of mole is 9 moles

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

Answer:

Sucrose contains two sugars (fructose and glucose) joined by their glycosidic bond in such a way as to prevent the glucose isomerizing to aldehyde, or the fructose to α-hydroxy-ketone form. Sucrose is thus a non-reducing sugar, which does not react with Benedict's reagent.

Explanation:

Answer:

Sucrose contains two sugars (fructose and glucose) joined by their glycosidic bond in such a way as to prevent the glucose isomerizing to aldehyde, or the fructose to α-hydroxy-ketone form. Sucrose is thus a non-reducing sugar, which does not react with Benedict's reagent.

Explanation:

please give me brainlist and follow

Answer: 4.5 moles

Explanation:

To understand how to solve this problem, you must understand the ratios written in this chemical equation.

The equation shows that 4 moles of Al forms 2 moles Al₂O₃. This creates the ratio 2:4 or \(\frac{2}{4}\)

To solve, you can set the two ratios to each other and cross multiply.

\(\frac{2}{4} = \frac{x}{9}\)

18 = 4x

x = 4.5 mol Al₂O₃

*both \(\frac{2}{4}\) and \(\frac{4.5}{9}\) can be simplified as \(\frac{1}{2}\), which verifies your answer*

The statement 'the pKa is the pH at which a weak acid’s protons are 50% titrated' is true as weak acids do not have the ability to get completely ionized.

The statement is true because weak acids do not completely ionize in solution, so at a certain pH, half of the acid’s protons will be titrated.

This is known as the acid’s dissociation constant, which is a measure of the acid’s ionization in solution. The pKa is the pH at which the acid’s dissociation constant is equal to one.

The lower the pKa, the more acidic the solution will be. A weak acid with a pKa of 2 will be more acidic than one with a pKa of 5.

Therefore, the statement 'the pKa is the pH at which a weak acid’s protons are 50% titrated' is true.

To learn more about pH , click here

https://brainly.com/question/15289741

SPJ4

An error during DNA replication would create a gene mutation.

During DNA replication, the genetic information in a cell is copied to make new DNA molecules. However, mistakes can occur during this process, leading to changes in the DNA sequence, which can result in a mutation. Mutations can also be caused by exposure to environmental factors, such as radiation or chemicals, which can damage the DNA molecule directly or affect the cellular processes involved in DNA replication.

Mutations can have a variety of effects on the organism, ranging from no effect to causing serious health problems or even death. Gene mutations can also be inherited from a parent, which can result in genetic disorders or predisposition to certain diseases. Therefore, it is important to understand the mechanisms of gene mutations and their potential impacts on organisms.

To know more about the Gene mutation, here

https://brainly.com/question/15448555

#SPJ1

Answer:

Explanation:

36 grams HClX (1mole HCl /36.46097 g HCl) X (6.02 X 10^23 particles/ 1mole)

=5.943890138 X 10^23 Molecules

As there are total of two atoms in HCl molecule( one hydrogen and one chlorine,

No. of atoms in one mole of HCl = 2x5.943890138x10²³=1.188778028 x10²³ atoms.  If you need it to the correct sig figs answer is 1.8 X x10²³ atoms.

here is where the numbers came from

the 1moleHCl/36.46097 g HCl is the Molar mass (get it from the periodic table

the 6.02 X 10^23 parcticle (atoms or molecules) / 1 Mole is avogadro's number

2Li + 2H2O____ 2LiaOH + 2H2

Answer:

2 Li + 2 H2O --> 2 LiaOH + 1 H2

Answer:

icicle becausit sounds right

Explanation:

icicles because it sounds right

Answer:

610 nm

Explanation:

Apx

Answer:

43.83 grams of NaCl are required to make 250 ml of a 3M solution.

Explanation:

As given in the question,

       Molarity of solution= 3M

      Volume of solution= 250ml

      Weight of solute Nacl=?

The formula for molarity is,

Number of moles=0.75 moles

According to the formula,

As we know, the molecular mass of NaCl is 58.44

Hence,

Answer:ABOMC5LDECEVCEC

The largest effect on the population of trout in Wisconsin was caused by the introduction of non-native species into the ecosystem.

The introduction of non-native species into an ecosystem can cause a disruption in the food chain, leading to a decrease in the population of native species. In Wisconsin, the introduction of non-native species such as the brown trout and rainbow trout has had a significant impact on the population of native brook trout.

The non-native species compete with the native brook trout for food and habitat, which has led to a decrease in the brook trout population. This highlights the importance of preserving the natural balance of ecosystems and avoiding the introduction of non-native species.

To know more about ecosystem, click here.

https://brainly.com/question/13979184

#SPJ1

The following equilibrium will shift in the direction of the product:

Given

Reaction

4HCl + O₂ → 2H₂O + 2Cl₂

Cl₂  was removed

Required

Equilibrium changes

Solution

Reaction = - action

adding the products ⇒ Shifts in the direction of the reactants

reducing the products ⇒Shifts in the direction of the products

Cl₂ as a product, so if Cl₂ is taken or reduced, the reaction will try to maintain system equilibrium by moving to the right (product formation) ⇒ Shift in the direction of the product:

There is no reason to run these solutes at the 20 MWCO because they are both much smaller than the MWCO of the membrane.

The MWCO (molecular weight cut off) is the molecular weight of a solute at which it will be retained by a membrane during a process such as ultrafiltration or dialysis. If a solute has a molecular weight higher than the MWCO of a membrane, it will be retained and not pass through the membrane. If the molecular weight of a solute is lower than the MWCO, it will pass through the membrane.

In this case, glucose has a molecular weight of 180 g/mol (6 carbons x 12 g/mol per carbon + 6 oxygens x 16 g/mol per oxygen) and albumin has a molecular weight of approximately 81,942 g/mol (607 amino acids x 135 g/mol per amino acid). Both of these solutes have molecular weights that are much lower than 20,000 g/mol, which is a typical MWCO for ultrafiltration or dialysis membranes.

They would both easily pass through the membrane and be lost during the process. Instead, a membrane with a much lower MWCO would be needed if we wanted to retain these solutes during a process such as ultrafiltration or dialysis.

Learn more about glucose here:

https://brainly.com/question/2396657

#SPJ1

The learning activities titled "Hypothesis," "Variables and Hypothesis," and "Constructing a Hypothesis" all share certain similarities and differences. A question that arises in response to an observation is similar to a scientific research question in that both require some level of investigation to achieve an answer. However, scientific research questions are typically more specific and refined, with a defined methodology for obtaining data and verifying results.

For such more question on Hypothesis

https://brainly.com/question/606806

#SPJ8